StarTech USB3S2SAT3CB SATA to USB Cable Hard Drive Adapter User Manual
- June 13, 2024
- StarTech
Table of Contents
- StarTech USB3S2SAT3CB SATA to USB Cable Hard Drive Adapter
- FCC Compliance Statement
- Product Overview
- Introduction
- Packaging Contents
- System Requirements
- Installation
- Operation
- Disconnecting the Hard Drive
- Initializing the Hard Drive
- Specifications
- Technical Support
- Warranty Information
- FAQ’s
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
StarTech USB3S2SAT3CB SATA to USB Cable Hard Drive Adapter
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and Other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are
for illustrative purposes only and do not represent an endorsement of a
product or service by StarTech.com, or an endorsement
of the product(s) to which this manual applies by the third-party company in
question. Regardless of any direct acknowledgment elsewhere in the body of
this document, StarTech.com hereby acknowledges that
all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Product Overview
Introduction
It is possible to connect a 2.5″ or 3.5″ SATA hard drive or solid-state drive (SSD) to your computer using a USB interface by utilizing the StarTech USB3S2SAT3CB SATA to USB cable hard drive adapter. For data recovery, drive cloning, and file backup purposes, this adapter offers a practical means to access and transfer data between your SATA drive and your computer.
Packaging Contents
- 1x USB 3.0 to SATA 2.5” HDD Adapter Cable
- 1x Instruction Manual
System Requirements
- Computer system with available USB 3.0 (5 Gbit/s) port or USB 2.0 port (480Mbps)
- 2.5” SATA hard drive or solid-state drive
Installation
Hardware Installation
WARNING! Hard drives and storage enclosures require careful handling,
especially when being transported. If you are not careful with your hard disk,
lost data may result. Always handle your hard drive and storage device with
caution. Be sure that you are properly grounded by wearing an anti-static
strap when handling computer components or discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the
computer case) for several seconds.
Note: This adapter cable will only work with 2.5” hard drives and solid-
state drives. 3.5” Hard drives and optical drives require a high power load
than can be provided via the USB bus.
- Connect the SATA Connector to the SATA reciprocal on your 2.5” SATA hard drive/solid state drive.
- Connect the USB connector from the cable to a USB port on the host computer system (optimal performance with USB 3.0, backward compatible with USB 2.0/1.1).
Operation
Connecting the Hard Drive
Once the cable has been attached to a computer, and the necessary software
will automatically install, and the drive will be accessible as though it were
installed within the system. Prior to using the drive, it will need to be
formatted according to your operating system requirements. To format your
newly attached hard drive, or create partitions, please consult the
documentation that accompanied your operating system at the time of purchase.
Powering the Drive
The hard drive adapter requires no external power supply, as it is capable of
receiving enough power from the USB Bus to which it is connected
Disconnecting the Hard Drive
Windows
- Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.
- Select the USB Storage Device from the list that appears.
- Wait for the message indicating that it is now safe to remove the device.
Note: Removing the connected drive prior to receiving notification that it is safe to do so, could result in losing or corrupting data stored on the drive. Once the Safe to Remove Hardware message appears, please disconnect the enclosure from the computer by removing the USB connection.
Mac OS X
To safely disconnect the attached drive from the host computer, close any
windows listing the contents of the removable drive. Once all windows are
closed, click on the USB storage icon on the desktop, and drag it to the Trash
Can icon on the desktop. Allow 5 seconds before physically removing the
enclosure/drive from the computer.
Initializing the Hard Drive
- If the SATA Hard Drive is blank it may need to be initialized and formatted before use. From the main Windows desktop, right-click on “My Computer” (“Computer” in Vista/ 7 / 8), then select Manage. In the new Computer Management window, select Disk Management from the left window panel.
- A dialog window should automatically appear, asking you to initialize the drive. Depending on the version of Windows, it will give you the option of either creating an “MBR” or “GPT” disk. GPT (GUID partition) is not compatible with some older operating systems, while MBR is supported by newer and older operating systems.
- Once initialized, locate the Disk that says it is “Unallocated” (check the listed hard drive capacity to confirm it’s the correct hard drive) and then right-click in the section that says “Unallocated” and select “New Partition”.
- Follow the on screen prompts to initialize the drive in the format of your choice.
Specifications
Technical Support
StarTech.com lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd.
and StarTech.com USA LLP (or their officers, directors,
employees or agents) for any damages (whether direct or indirect, special,
punitive, incidental, consequential, or otherwise), loss of profits, loss of
business, or any pecuniary loss, arising out of or related to the use of the
product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement may not
apply to you.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time. Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools. StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom, and Taiwan servicing a worldwide market.
FAQ’s
What is the StarTech USB3S2SAT3CB SATA to USB Cable Hard Drive Adapter?
The StarTech USB3S2SAT3CB is a SATA-to-USB cable adapter designed to connect a SATA hard drive or SSD to a computer using a USB port.
What types of SATA drives are supported by this adapter?
The adapter supports both 2.5-inch and 3.5-inch SATA hard drives and solid- state drives.
What is the transfer interface of this adapter?
The adapter utilizes USB 3.0, which provides faster data transfer rates compared to USB 2.0, enabling quick access to your SATA drive's contents.
Does this adapter require external power?
Yes, the adapter requires an external power source to provide sufficient power to the connected SATA drive. It comes with an included power adapter.
Is the StarTech USB3S2SAT3CB compatible with Mac and Windows computers?
Yes, the adapter is compatible with both Mac and Windows operating systems, ensuring broad compatibility with various devices.
Does the adapter support hot-swapping of SATA drives?
Yes, the StarTech USB3S2SAT3CB supports hot-swapping, allowing you to connect and disconnect SATA drives while the computer is running.
What is the maximum data transfer speed supported by this adapter?
The adapter supports data transfer rates of up to 5 Gbps, the maximum speed offered by USB 3.0.
Can I use this adapter to clone my hard drive to a new drive?
Yes, the adapter supports hard drive cloning, making it useful for creating backups or upgrading to a larger drive.
Does the adapter work with UASP (USB Attached SCSI Protocol)?
Yes, the StarTech USB3S2SAT3CB supports UASP, which enhances data transfer speeds when used with a UASP-enabled host controller.
Can I use this adapter to access data from an old internal hard drive?
Absolutely, the adapter allows you to access data from old internal SATA hard drives, making it ideal for data recovery and retrieval.
Is there any software required for using the adapter?
No, the adapter is a plug-and-play device and does not require additional software or drivers for basic functionality.
Can I use the StarTech USB3S2SAT3CB to connect SATA optical drives?
Yes, the adapter can also be used to connect and access data from SATA optical drives such as DVD or Blu-ray drives.
References: StarTech USB3S2SAT3CB SATA to USB Cable Hard Drive Adapter – Device.report