HORNBACH 10445606 FLAIR Viyu Smart LED Ceiling Luminaire Instruction Manual

HORNBACH 10445606 FLAIR Viyu Smart LED Ceiling Luminaire

Product Information

• Product Code: 1014047424953606

Technical Specifications

• Nominal Voltage: 220-240 V~
• Nominal Power: 24 W
• Standby Power Consumption: 0.5 W
• Protection Class: Class II
• Protection Rating: IP20
• Energy Efficiency: Not specified
• Color Temperature: Not specified
• Luminous Flux: 2500 lm
• Dimensions: Height – 65 mm
• Weight: 1.09 kg
• Frequency Band: Not specified
• Transmission Power: Max. 10 dBm
• Free Field Range: 30 m
• Protocol: ZigBee 3.0

Product Usage Instructions

Mounting Instructions

1. Unscrew the opal cover from the luminaire.
2. Select a mounting location where there are no pipes or electrical cables. Use the luminaire as a template to mark the mounting holes and drill them.
3. Disconnect the power supply.
4. Attach the luminaire to the mounting surface using the provided screws or fasteners.
5. Screw the opal cover back onto the luminaire.

System Requirements

To set up and control the lamp, it must be within the range of the network. The lamp requires a HOME by hornbach Gateway or any other ZigBee 3.0 compatible gateway.

Smart Home Integration

To integrate the lamp with a ZigBee 3.0 compatible gateway, refer to the gateway’s instruction manual for the pairing process.

Assembly instructions

Description

1. Opaque cover of main light
2. Fastening holes
3. Luminaire
4. Power supply terminal
5. Cable inlet
6. 2 x screws/plugs

System requirements
At least one of the following appliances is necessary: SMART HOME by hornbach gateway or other ZigBee 3.0 compati-ble gateway. For setup and control, the smart lamp must be in reach of your network.

Assembly

60227 IEC52/60245 IEC57 2x(0.75mm²-2.5mm²)

Caution: First disconnect the power supply for this connection.

1. Unscrew the opaque cover from the luminaire.

2. Select an installation location without pipes or cables behind it. Mark the fastening holes using the luminaire as a template, and drill the holes.

3. Route the power cable through the cable inlet.

4. Insert the plugs and fasten the luminaire with the screws.
   Caution: Make sure the fasten-ers are suitable for the ceiling material.

5. Connect the luminaire to the power supply (see figure). Make sure that the connections are tight and that no loose cable endings emerge from the terminal.
   N: Blue
   L: Brown

6. Screw the opaque cover back onto the luminaire.

7. Connect the power supply.

SMART HOME by hornbach inclusion

• Make sure, the installation site is within reach of your network.
• Tap on the + symbol in the right top corner and then on “device”.
• Choose your VIYU luminaire and set your gateway in pairing mode by tap-ping on the + in the top right corner. Power on the luminaire. The luminaire flashes once cold white, once warm white, and then continuously stays warm white until paired.
• In the devices overview you will find the new luminaire. You may re-name it now.

Inclusion to another Zigbee 3.0 compatible gateway
See instructions of your gateway.

Factory reset
Switch mains supply on and off quickly 5 times within short time (power-on time less than 2s each).

Maintenance and care
Wipe the luminaire with a soft, dry cloth only. Never use scouring powders or chemical cleaning agents. Never allow the electrical components to become damp.

Please read these instructions carefully and keep them safe for later use!

Safety information

• Electrical work and repairs must be per-formed by a qualified electrician.
• During installation, always observe the national installation regulations.
• The luminaire must not be modified in any way. Risk of electric shock and accident.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

Declaration of conformity hereby, HORNBACH Baumarkt AG declares that the radio equipment type “Smart LED luminaire” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hornbach.com/productcompliance

Technical data

• Nominal voltage 220-240 V~ 50/60 Hz

• Rated power 24 W

• Standby power 0.5 W

• Protection class II

• Degree of protection IP 20

• Energy efficiency Class E

• Colour temperature 2700 K-6500 K

• Luminous flux 2500 lm

• Dimensions 0365 mm H: 65 mm
  Weight 1.09 kg
  Frequency band 2400-2483.5 MHz

• Transmission power max. 10 dBm

• Free field range 30 m

• Protocol ZigBee 3.0

Used symbols

Caution: Risk to health and the product.

Do not use outdoors or in damp environments.

Class II appliance.

Light source replaceable by qualified electrician.

Control gear replaceable by qualified electrician.

This product contains a light source of the energy efficiency class E.

Waste disposal

The crossed-out wheeled bin symbol requires separate disposal for waste electrical and electronic equipment (WEEE). Such equipment may contain valuable, but dangerous and hazardous substances. You are required by law to return these products to a designated collection point for the recycling of WEEE and must not under any circumstances dispose of them as unsorted municipal waste. In this way, you can help to con-serve resources and protect the environment. In Germany, HORNBACH is obliged:

• to take back old appliances of the same type free of charge in HORNBACH stores when you pur-chase a new electrical or electronic appliance.
• to take back up to 3 WEEE of the same type (up to max. 25 cm edge length) free of charge in HORNBACH stores, even if you do not purchase a new appliance.
• when delivering a new electrical or electronic appliance to a private household, to collect an old appliance of the same type free of charge or to enable you to return it in your immediate vicinity.

Make sure that all personal data is deleted before you dispose of the appliance (see “Factory reset”). For further details, please consult www.hornbach.com or your local authorities. Children must not play with plastic bags and packaging material, due to the risk of injury and suffocation. Store such material safely or dispose of it in an environmentally friendly way.

www.hornbach.com/productcompliance

Manufactured for HORNBACH Baumarkt AG Hornbachstraße 11
76879 Bornheim / Germany www.hornbach.com

References

• hornbach.com
• hornbach.com
• hornbach.com/
• Product Compliance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>