CRYSTORAMA 135-MK Calypso Ceiling Mount Ceiling Light Instruction Manual
- June 13, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 135-MK Calypso Ceiling Mount Ceiling Light
ASSEMBLY INSTRUCTION
Hang crystals on the rings alternating between crystals A and B
A= 30mmx53 sets
B= 
76mmx53 sets
C= (30mm Ball with chain) x1set
WARNING
Electrical Danger
|
Turn Power off
---|---
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 3- Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE
LED BULBS FOR EXTENDED USE
This fixture is Damp rated.
How to install
- Thread the mounting screws into the matching holes in the mounting bar. Secure the mounting bar to outlet box with the outlet box screws.
- Connect fixture wires to supply wires in outlet box.
- Raise ceiling pan up allowing for the mounting screws to protrude through key slots on the ceiling pan. Rotate ceiling pan clockwise until mounting screws are in narrow part of key slots, tighten with screwdriver.
- Install the bulb(not included) into the socket.
- Secure the bottom basket to the ceiling pan with the finial.
- Hang crystals to the ceiling pan and bottom basket, alternating between glass drop A and B.
- Hang glass drop C at the bottom of the bottom basket.
Dimension
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Number
Part Numbers
- A. (1)-Mounting hardware
- B. (1)-Ceiling pan
- C. (3)-Socket
- D. (1)-Bottom basket #XRF135MKBT
- E. (3)-Finial #XRF135MKFIN
Customer Support
Read User Manual Online (PDF format)
Loading......