SW-MOTECH GPT.00.152.50000-B Street Rack Sysbag 10 Adapter Plate Instructions
- June 4, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH GPT.00.152.50000-B Street Rack Sysbag 10 Adapter Plate
Instructions
Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop.
Installation and/or maintenance of this product require good technical
understanding! For your own safety SW-MOTECH recommends having installation
and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no
liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country: specific regulations concerning vehicle registration/ operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION
Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING
All parts and connections removed from the vehicle must be reinstalled in
accordance with the vehicle manufacturers’ specifications or replaced by parts
delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with
medium-strength liquid thread locker.
Torque specifications undefined by SW-MOTECH must be obtained from the
vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK
After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.
Parts list
| Step | No. | Item No./ Description* | Part | Quantity** | N-m*** |
|---|---|---|---|---|---|
| (1) | GPT.00.152.502 | Adapter plate | 1/1 |
*All measurements in millimeters. • ** The second number indicates the total quantity of the part in the delivery.
*** No torque specifications: Use the torque defined by vehicle
manufacturer! The standard torque in this table can be used as long as it is
within the vehicle manufacturer’s specifications.
Mounting
Mounting the adapter plate on the STREET-RACK.
Step [1]: Slide the adapter plate (1) with the two hooks into the holes of your STREET-RACK (sold separa-tely).
Step [2]: Press the adapter plate (1) slightly downwards and turn the fastener 90 degrees until it fits into place.
Step [3]: Finally, press the lock firmly down as shown in the drawing. To release the adapter plate, simply pull the fastener upwards and turn it to the starting position.
Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop.
Installation and/or maintenance of this product require good technical
understanding! For your own safety SW-MOTECH recommends having installation
and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no
liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country:specific regulations concerning vehicle registration/ operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION
Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING
All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturers’ specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strength liquid thread locker. Torque specifications undefined by SW- MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK
After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.
Parts list
| Step | No. | Item No. / Description * | part | Quantity – h | N. m ` |
|---|---|---|---|---|---|
| (1) | TRT.00.787.900.04 | Tank Ring | 1 /1 | ||
| (2) | TRT.00.787.900.10 | Mounting Ring | 1 /1 | ||
| (3) | M5 x 14; DIN 7991 | Countersunk Screw | 4 /4 | 4,5 | |
| (4) | M5; DIN 985 | Lock Nut | 4 R. | ||
| (5) | TRT.00.787.022 | Sleeve Nut; black | 4/4 | 2 |
Note: a All measurements in millimeters. b The second number indicates
the total quantity of the part in the delivery.
c No torque specifications: Use the torque defined by vehicle
manufacturer! The standard torque in this table can be used as long as it is
within the vehicle manufacturer’s specifications.
Mounting
Adapter plate for STREET-RACK
Attach the mounting ring (2) to your adapter plate for STREET-RACK (sold
separately), as shown in the drawing.
Tighten the screws (3) as specified.
Carefully attach the tank ring (1) to the mounting ring (2). Using too much
pressure to tighten the sleeve nuts can damage the tank ring.
ATTENTION: Use liquid thread locker!
Tighten the sleeve nuts (5) as specified.
SW-MOTECH GmbH & Co. KG
Ernteweg 7-10
35282 Rauschenberg
Germany
Tel./phone + 49 (0)6425 / 8168 – 050
Fax / fax + 49 (0)6425 / 8168 – 10
info@sw-motech.com
www.sw-motech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>