DOMUS Lighting ZELDA-18 Wall Light Installation Guide
- June 13, 2024
- DOMUS LIGHTING
Table of Contents
DOMUS Lighting ZELDA-18 Wall Light Installation Guide
Thank you for purchasing your new ZELDA-18 Wall Light, Please take the time to
read and understand the instruction sheet below.
Failure to do so may void warranty
Installation Instructions
Note:
- The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
Specifications
Voltage| 240V| Lumen (±5%)| Warm White 3000K – 1600lm Neutral
White 4000K – 1730lm White 5700K – 1850lm| Dimmable| Yes
---|---|---|---|---|---
Power| 18W| Beam Angle| 120º| Operating Temp| -20ºC ~ 45ºC
IP Rating| 65| CCT| 3000K – 4000K – 5700K (Switchable)| Power
Factor| 0.9
CRI| ≥90| Lifespan| 50,000hrs| |
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600
Fax: 02 9554 9433
enquiries@domuslighting.com.au
www.domuslighting.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>