Asahi AS-DUR010 Men’s Wearable Urine Collector for Sleeping Position User Guide

Asahi AS-DUR010 Men’s Wearable Urine Collector for Sleeping Position

The device is mainly meant to be used in a lying position

Before using the device, be sure to read this manual and fully understand its content. Please keep this manual handy for future reference.

Basic way to use

warning

• Until you get used to using the product, please lay out the provided disposable absorptive sheets under the person to avoid getting bedding dirty in the case of an accident.
• If worn for long periods of time, it could result in steamed and it may hurt the skin. Please remove the receiver once or twice a day, wipe
• The urine collector cannot be used for those who will remove it from themselves or those with forceful body movements
• Depending on the situation, you may need to make an opening in the underwear or pants to allow the hose to pass through, making it easier for urine to flow.

How to mount the receiver

1. Turn the inner fabric of the garter upward

2. Hang the anti-slip rubber onto the protrusion on the receiver

3. Close the central and lower surface fastener

4. Mount the belt Please line up the central line with the navel. If putting it on yourself do so sitting down; if caring for someone else we recommend having the person lie down in a lateral position and spreading the waist belt under them before returning them to the supine position.

5. Insert the penis into the receiver When doing so, please make sure that the penis is not bent. If the penis is bent, it will cause leakage.
   Remove the central surface fastener and check if necessary

6. Pass the front belt on the left and right through the through hole on the waist belt (①), and fold the surface fastener back to the best position and fasten it there (②). Fix the belt on the other side in the same way.

   • Please use with the through hole in an easy-to-use position.

7. Raise up one knee, pass the rear belt under the thigh (③), and fix the waist belt with the through hole (④). Fix the belt on the otherside in the same way

8. If you put it on in a seated position, lie down into a sleeping position and make final adjustments to each belt to complete the process.

To those using the backflow prevention membrane If the person is low mobility you can use with the receiver only. If the person is highly mobile and the penis slips out from the receiver, please attach the backflow prevention membrane to the receiver’s retainer when using.

FAQ Frequently asked questions

How do I know when to replace it?
You should replace it when the tube starts to harden and deteriorate. Deterioration will cause leaks. If you wash it frequently and keep it sanitized you can use it for a long time.

What are some tips to avoid leaks?
To enable the urine to flow smoothly, secure the height difference between the receiver and urine tank, and ensure that the tube isn’t mashed.

How do I store it when not used for long periods?
Follow the instruction manual on cleaning and drying the product, and then store in a clean location away from high temperature and humidity without bending the tube.

Useful Tip
Apply Vaseline or other lubricant to the rubber O-ring at the mouth of the urine collection bottle for easier attachment and removal.

Names of each part and included accessorie

Tube length adjustment and tube insertion methods

The tube is included with a length of 150cm. Referring to ［ Table 1 ］below, please cut it to the appropriate length and insert it into the tank［. Figure 1 ］

Sterilization
Please sterilize inside the receiver using a commercially available alcohol- based disinfectant.

Rinsing and drying
Rinse well with cold or tepid water, then allow to dry completely in the shade.

When dirt is visible
Long term use can lead to urinary stones, protein, etc. to build up. In such cases please remove the dirt by soaking for about 20 minutes in a solution of citric acid (about 5%) and then washing. You can also use commercially available urinal tablets.

Materials

• Receiver/silicone
• Tube/PVC
• Tank/Polyethylene
• Cap/Polyacetal (POM)
• Backflow prevention membrane/latex

Warranty and returns

• Returning and exchanging products For hygienic purposes, products that have been used or worn cannot be returned.

Notes of caution

• If redness, etc. is observed on the skin, please cease use immediately.
• Until you get used to using the product, please lay out the provided dis- posable absorptive sheets, etc. under the person’s lower back and prac- tice to avoid leaks.
• If worn for long periods of time, it could result in steamed and it may hurt the skin. Please remove the receiver once or twice a day to clean and sanitize the area.
• To prevent the propagation of bacteria and mod that can lead to odor and infection, take sufficient care in sanitizing the product by washing, sanitizing, and drying the parts, etc. Also, reusing on other people is prohibited.
• Please use lying down (facing up or to the side).
• The expressions displayed on this product and the reproducibility of effects will vary by person and do not necessarily constitute a guarantee of benefits or effects.
• We cannot provide support for problems occurring when this product is used with modifications, alterations, etc. added.
• In order to ensure urine flow, please mount with the height difference between the receiver and the urine collection tank.
• Store out if direct sunlight at room temperature in a dry place.

References

• Asahi Industry Co., Ltd.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>