ASAHI DENSO CZ186 PANEL SW User Manual
- June 1, 2024
- ASAHI DENSO
Table of Contents
PANEL SW [CZ186]
User manual
Product name : PANEL SW
Model No. : CZ186
How to use Immobilizer, CZ186
1. Immobilizer System
This product is equipped with immobilizer system to protect against theft.
2. How to set the immobilizer
The immobilizer system is consists of the PANEL SW, immobilizer key, and
antenna.
These are attached to the construction machine by the operator at the factory
or in field.
3. How to use the product
User owns the immobilizer key.
When to start the engine of the construction machine, user insert the
immobilizer key in the ignition SW.
At this time, panel SW and the immobilizer key built-in chip authenticate the
code via antenna. In case that the code inside the immobilizer key matches,
engine starting and construction machine operation can be possible.
In case that the code does not match, on the other hand, engine starting and
construction machine operation can not be possible.
4. Technical Specification
Parameter | Operating frequency | RF Power |
---|---|---|
NOTE | – | – |
MIN | – | – |
NOM | 134.2 | – |
MAX | – | 55 |
UNIT | kHz | dBuV/m @10m |
[for FCC]
FCC CAUTION
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Documents / Resources
|
ASAHI DENSO CZ186 PANEL
SW
[pdf] User Manual
CZ186 PANEL SW, CZ186, PANEL SW
---|---