WYZE WLPA19CV2 Smart Color Bulb User Guide
- June 13, 2024
- Wyze
Table of Contents
WYZE WLPA19CV2 Smart Color Bulb
Read this manual carefully and save it for future reference.
Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary.
IN THE BOX
- Wyze Bulb Color
- Quick Start Guide
SETUP
- Download the Wyze app and sign in or create an account.
|
---|--- - Install Wyze Bulb Color and turn on the power. If using multiple Wyze Bulbs on the same switch, install all the bulbs before turning on the power.
- Open the Wyze app and tap the + plus sign on the top left. Tap Add Device > Power & Lighting, then select Wyze Bulb Color. Follow the in-app instructions to set up the bulb.
Apple logo and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Google Assistant, Google Home, Google Play, and the Google Play logo are trademarks of Google LLC.
NOTES
- Make sure that the power is off when installing or removing the light bulb.
- Do not use this product with a dimmer (e.g. a desk lamp with a dimmer switch) to avoid damaging the product.
- Risk of electric shock – Do not use where directly exposed to water.
- Do not use in a narrow or poorly ventilated light fixture.
- Not for use in totally enclosed or recessed luminaires/fixtures.
- Not for emergency lighting.
- Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
SPECIFICATIONS
Model: WLPA19CV2
Size: 60x60x112mm
Rated Power: 12 watts
Lumens: 1100 lumens
Base Type: E26
Working Voltage: AC 120V~60Hz
Color Temperature: 1800k – 6500k
Communication Mode: 802.11 b/g/n, 2.4 GHz Bluetooth
Life Expectancy: 25,000 hours
FCC WARNING
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna and transmitter.
ISED RADIATION EXPOSURE STATEMENT
This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Only use the power supply provided. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED RSS WARNING
This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
WARRANTY INFORMATION
Your Wyze product is covered by a three-year limited warranty. You can view the limited warranty terms at https://wyze.com/return-warranty-policy or request a copy by contacting Wyze at +1 206-339-9646.
Wyze and Wyze Bulb Color are trademarks of Wyze Labs, Inc.
NEED HELP?
Contact our Support Team: https://wyze.com/support
Join the Community: https://wyze.com/community
Scan the QR code to learn more
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>