VIVOTEK SC9133 Automatic Passenger Counter Installation Guide
- June 12, 2024
- Vivotek
Table of Contents
VIVOTEK SC9133 Automatic Passenger Counter
Product Information
- Product Name: SC9133
- Model Number: SC9133
- Part Number: 625069401G
Package Contents
- Quick Installation Guide (QIG) SC9133
- Network Camera 0002D10766AD
- Power Adapter 621079200G
Green & Yellow Wires Warnings
- Power off the Network Camera as soon as smoke or unusual odors are detected.
- Do not place the Network Camera on unsteady surfaces.
- Do not touch the Network Camera during a lightning storm.
- Do not drop the Network Camera.
Usage Instructions
- Power off the Network Camera if you detect smoke or unusual odors coming from it.
- Refer to the user’s manual for the recommended operating temperature.
- Ensure that the Network Camera is placed on a stable surface.
- Avoid touching the Network Camera during a lightning storm.
- Do not drop the Network Camera to prevent damage.
- If you need to replace or install waterproof components, such as cables or cable glands, ensure they are properly installed to maintain the IP65/66/67 warranty.
DI Voltage/Connectior
- The DI voltage ranges from 0 to 1.0V.
- When the SC9133 DI status is HIGH, the voltage is 1.0 to 5V.
- Uncertain DI status indicates either low or high voltage.
- For voltages ranging from 5 to 60V, the DI status is LOW.
- Open circuit and short circuit conditions are indicated as HIGH.
Recommended Installation Height
- Refer to the User Manual for information on the Field of View (FOV) and recommended installation height.
DI and DO Connections
- DC2: Power input for DC – DC+: Positive terminal for power input
- DI+1, DI-1, DI+2, DI-2: Digital input connections
- RxData+, RxData-: Receive data connections
- TxData+, TxData-: Transmit data connections
- DO+1, DO-1: Digital output connections
- RS485A_P, RS485A_N: RS485 A connections
- RS485B_P, RS485B_N: RS485 B connections
Note: The dimensions of the SC9133 Network Camera are 160x78mm. Use a minimum 18 AWG wire and a 3.5mm screw for installation.
Warning Before Installation
- Power off the Network Camera as soon as smoke or unusual odors are detected.
- Refer to your user’s manual for the operating temperature.
- Do not place the Network Camera on unsteady surfaces.
- Do not insert sharp or tiny objects into the Network Camera.
- Replacing or failing to properly install the waterproof components, e.g., cables or cable glands, will void our IP65/66/67 warranty.
- Do not drop the Network Camera.
- Do not touch the Network Camera during a lightning storm.
Package Contents
Consumption & Power Input
PoE: 12.5W, 42V(0.3A)-57V(0.22A)
DC: 13.3W, 9V(1.48A)-48V(0.28A)
Hardware Installation
Recommended Installation Height
- Installation height: 1.9M ~ 2.4M
Refer to the User Manual for the FOV and installation height information.
DI Voltage/Connection | SC9133 DI Status |
---|---|
0 ~ 1.0V | HIGH |
1.0 ~ 5V | Uncertain (Low or High) |
5 ~ 60V | LOW |
Open Circuit
(w/o internal pull high)
| HIGH
Short Circuit| HIGH
Please contact authorized distributors for warranty and RMA service.
Visit https://www.vivotek.com/support/warranty-rma
All specifications are subject to change without noice.
Copyright © 2021 VIVOTEK INC. All rights reserved.
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282| F: +886-2-82455532| E:
sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686| F:
408-773-8298| E:
salesusa@vivotek.com
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817 | E:
saleseurope@vivotek.com