PANDUIT MWBA1 Wall Board Adapter Instruction Manual
- June 12, 2024
- PANDUIT
Table of Contents
PANDUIT MWBA1 Wall Board Adapter
Product Information The Wall Board Adapter is a communication or data wiring accessory designed for use in communication or data wiring applications. It is intended for use only where local codes permit and is not suitable for use with electronic wiring devices.
Part Numbers: MWBA1 INSTALLATION INSTRUCTIONS, PN99D
Product Usage Instructions
- Cut a hole in the drywall with the following dimensions: 3.75 inches (95.3mm) x 2.00 inches (50.8mm).
- Ensure that the maximum drywall thickness is 0.75 inches (19.1mm).
- Avoid cutting the hole through any studs.
- Refer to the side view template for a visual representation of the single gang adapter.
Contact Information
- For instructions in local languages and technical support, visit: www.panduit.com/resources/install_maintain.asp
- Email: techsupport@panduit.com
- Phone: 866-405-6654
Revision: 06
Wall Board Adapter
Part Numbers: MWBA1
INSTALLATION INSTRUCTIONS
Designed for Communication or Data Wiring Applications
USE ONLY WHERE LOCAL CODES PERMIT
NOT INTENDED FOR USE WITH ELECTRONIC WIRING DEVICES
SINGLE GANG ADAPTER (MWBA)
- Cut a 3.75″ (95.3mm) x 2.00″ (50.8mm) hole in the drywall.
Maximum drywall thickness – 0.75″ (19.1mm). Avoid studs.
TEMPLATE FOR SINGLE GANG ADAPTER
For Instructions in Local Languages and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail: techsupport@panduit.com
Phone: 866-405-6654
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>