Woods 59743 Indoor Wireless Remote User Manual
- June 12, 2024
- Woods
Table of Contents
Woods 59743 Indoor Wireless Remote
The product is pre-programmed and ready to use.
Set-Up
- Plug the receiver into a standard 125-volt AC electrical outlet.
- Plug the device into the receiver outlet
- Remove the plastic battery tab from the battery compartment in the back of the remote control to activate the DC l 2V Type A23 pre-installed battery.
To Use
- To turn the receiver ON, press the “ON” button on the remote control. The red LED of the remote control will illuminate momentarily and the LED of the receiver will remain illuminated.
- To turn the receiver OFF, press the “OFF” button on the remote control. The LED on the receiver will shut off.
Battery handling and usage
WARNING: Keep batteries away from children and pets.
- Follow the battery manufacturer’s safety and usage instructions. Insert the battery observing the proper polarity ( +/-) as indicated inside the Battery Comportment.
- CAUTION: Failure to properly align the battery polarity can cause personal injury and/or property damage.
- Remove the spent or discharged battery from the product. Remove the battery when not using the product for an extended period.
- Never throw batteries into a fire. Do not expose batteries to fire or other heat sources.
- Dispose of or recycle spent/discharged batteries in compliance with all applicable laws. For detailed information, contact your local solid waste authority.
Battery replacement
- Remove the battery compartment cover from the back of the remote control by sliding the cover in the direction that its treads curve.
- Remove the spent battery and place a new DC l 2V Type A23 battery into the battery compartment, correctly observing the polarity indications(+/-) inside the battery comportment.
- Replace the battery compartment cover.
This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions: (l) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Closs B digital device, pursuant to port 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and con radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception.
Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to on outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To improve performance, it is recommended that the outlets be positioned at least 8.5 feet apart.
125V ac / 60Hz
- 13A / 1625W resistive
- 8A / lOOOW tungsten
- 315 MHz frequency
Range: Up to 66 ft.
FOR INDOOR USE ONLY DO NOT EXCEED RATED CAPACITY
FEATURES
-
Wireless Remote Control:
The Woods 59743 gives you the ability to wirelessly control electrical components inside of a building from a distance. -
Range:
Within the specified operating range of the remote control, which is typically measured in feet, the remote control is able to send signals to the receiver. -
Versatility:
In most cases, the remote control is compatible with a wide variety of electrical devices used indoors, including but not limited to lamps, fans, small appliances, and seasonal decorations. -
A Number of Different Channels:
There are certain types that provide several channels, which enables you to operate multiple devices individually while yet just needing one remote. -
Simple Config:
The remote control and the receiver typically arrive pre-paired, which makes the process of setting everything up quick and easy. -
Plug-and-Play:
The remote control is often ready to use without requiring any additional configuration, and the receiver may typically be directly plugged into a regular electrical socket. -
Mount for Remotes on the Wall:
When the remote is not in use, the bracket can be easily mounted on the wall using some versions’ included wall-mounting hardware. -
Conveniently Sized:
In order to facilitate its use and allow for easier transportation, the remote control is typically intended to be small and lightweight. -
The LED Indicator is for:
There may be an LED indication on the remote that illuminates whenever it is sending out messages. -
Power Provided by a Battery:
Batteries are required to use the remote control, and depending on the model, the batteries may already be included. -
Control for On/Off:
The remote control will often include buttons for turning on and off the various connected devices. -
Timers That Can Be Programmed:
You may be able to configure particular on/off schedules for connected devices using programmable timers that may be included in some versions of the software. -
Long Shelf Life of the Battery:
The battery life of the remote has been improved so that it can withstand extended use without needing to be replaced. -
Child-Protection Functions:
There are certain versions that have a child safety function that prevents the remote control from being used unless a certain combination of buttons is hit at the same time. -
Extension cords are compatible with this device:
You might be able to control devices that are not directly plugged into the wall socket by using an extension cord and a remote that is compatible with extension cords. -
Extender of the Scope:
It’s possible that certain versions come equipped with a range extender function that allows for a greater operational distance to be maintained between the remote and the receiver. -
Energy-Saving:
The Woods 59743 is able to assist in the conservation of energy as well as the reduction of the costs associated with utility services. -
Protection for the Home:
The remote may be used to regulate the internal lighting, which improves the safety of your home by creating the impression that someone is present even when you are not there. -
Control That Is Easily Accessible:
From the coziness of your couch or bed, you can use the remote to control a number of different electronic items. -
Perfect for Those Who Have Difficulty Moving Around:
The wireless remote control is especially helpful for people who are elderly or have restricted mobility since it provides quick access to turn on and off a variety of devices without the need to go around.
FREQUENTLY ASKED QUESTIONS
What is the Woods 59743 Indoor Wireless Remote?
The Woods 59743 is an indoor wireless remote control that allows you to conveniently operate electrical devices from a distance.
What types of devices can the Woods 59743 remote control?
The Woods 59743 is typically compatible with various indoor electrical devices, such as lamps, fans, small appliances, and holiday decorations.
How far is the operating range of the Woods 59743 remote?
The operating range of the Woods 59743 remote usually varies, but it can typically work within a range of several feet from the receiver.
Does the Woods 59743 remote require programming or pairing?
The Woods 59743 remote and receiver are often pre-paired, so you can use them without additional programming.
Is the Woods 59743 easy to set up?
Yes, the setup of the Woods 59743 is usually straightforward. Plug the receiver into an electrical outlet, and the remote is ready to use.
How is the Woods 59743 powered?
The Woods 59743 remote is powered by batteries, and some models may come with batteries included.
Can I control multiple devices independently with the Woods 59743 remote?
Some versions of the Woods 59743 remote may offer multiple channels, allowing you to control different devices independently using the same remote.
Does the Woods 59743 remote have an LED indicator?
Yes, the remote may have an LED indicator to show when it's transmitting signals.
What types of controls does the Woods 59743 remote have?
The remote usually features on/off buttons to control connected devices.
Can I program the Woods 59743 remote with specific schedules?
Woods 59743 may have programmable timers, enabling you to set specific on/off schedules for connected devices.
Is the Woods 59743 remote suitable for home security purposes?
Yes, the remote can be used to control indoor lighting, enhancing home security by giving the appearance of occupancy when you're away.
Is the Woods 59743 ideal for elderly or people with limited mobility?
Yes, the wireless remote is particularly helpful for the elderly or those with limited mobility, providing easy access to switch on/off various devices without moving around.
Can the Woods 59743 control devices connected to extension cords?
Yes, the remote may be compatible with extension cords, allowing you to control devices that are not directly plugged into the wall outlet.
Does the Woods 59743 have a range extender feature?
Woods 59743 may have a range extender feature to increase the operating distance between the remote and the receiver.
Is the Woods 59743 designed for indoor use only?
Yes, the Woods 59743 is specifically designed for indoor use and may not be suitable for outdoor applications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>