Hawk-Woods MINI X-BOXX 800W Li-Ion Battery User Guide

June 6, 2024
Hawk-Woods

**Hawk-Woods MINI X-BOXX 800W Li-Ion Battery User Guide

**

Hawk-Woods X—Boxx brand has a long established history for delivering power for demanding equipment such as professional film cameras or lighting applications. The X-boxx range has stood up over the years, proving to be robust and long serving to it‘s users!

The X-Boxx mini gives you all the advantages of a conventional battery box but now is more compact plus lighter then it’s predecessors and competition.

General overview

The X-Boxx mini gives you all the advantages of a conventional battery box but now is more compact plus lighter then it’s predecessors and competition.

This product comes with 2 years guarantee warranty from the initial purchase date. Contact us directly if you have any enquires: Sales@Hawkwoods.com

LCD DISPLAY

LCD DISPLAY

A: Visually indcates remaning runtime va baCm bars
B: Loading splash screen, situational message notifying to Hold button for 28v output.
C: Current running specifications of the X-Boxx at runtime.
D: Remaining runtime as a percentage.
E: The voltage default will be set to IN./*V. This will change to 28V when ’Check’ button is held for 3s
F: Chheck button has two available functions. Firstly when pressed once will turn on the screen if power is available. If Held for 3s the XLR3 outputs will be enabled for 28V. The backlit display marked (E) will also update to reflect 28V being enabled.

Note: The backlit display does not typically drain enough current to cause concern whilst its on. Generally the backlit display will turn off when inactive for less than a minute unless 28V is enabled at which then the display will remain active for 2 hours.

CHARGING

The MXB-880 has a built in charger that can be located underneath the carry handle. The appropriate mains lead will be found inside the box when initially purchased. If you require a replacement you can contact us directly.

Typical charge times with the supplied mains can take around 10 hours to fully charge. However at 7 hours you will have 90% capacity and we generally say this will be more than sufficient for most in a hurry. Alternatively if preferred you can still charge via one of the XLR¢ connectors with one of our X-Boxx chargers.

Please Note: Once disconnecting the mains IEC, please allow approximately 15 seconds before re-connecting if required It you are still having issues please refer to resetting the unit using a paper clip.

PRODUCT SPECIFICATIONS

The following specifications can be located on the base of your MXB-880 unit.

General

|

Model:

|

MXB-880

---|---|---
Charger| Input:| 100-240VAC 50/+0hz
Current:| 1.7A Max (@110VAC)
Output:| 16.BV / BA
XLR 4P

4.4v ouiput

| Vohoge:| 14.4V
Capacity:| S0Ah
Wattage:| 880Wh
Max Discharge:| 350 Walls (25A)
28V deg Output| Output:| 28V @ éA Max

Wiring: XLR 3pin = 1 Neg 2 Pos
XLR 4pin = 1 Neg 4 Pos

4.4V & 28V
Power out using XLR 4 (T 4.4V) & XLR 3 (28V) OUTPUTS.

LIGHT WEIGHT
The lightest floor baftery on the market whilst strong, durable and stationary.

BUILT IN CHARGER
Making this a complete unit for most power applications on set.

POWER STATUS
Keep up to date with real time power guage with backlit display.

CHECK ONLINE

Telephone: +44 (0) 1233 6387 15
Web: www.hawkwoods.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals