FXLuminaire DMLEDTAABGZD3LED18RAAB LED Pathlight Instruction Manual
- June 12, 2024
- FXLuminaire
Table of Contents
FXLuminaire DMLEDTAABGZD3LED18RAAB LED Pathlight
Product Information
The Designer/Standard Path Light is a low-voltage outdoor lighting fixture. It operates at a voltage range of 11-15 V and has a power consumption of 12.5 watts. The product is designed to provide landscape and architectural lighting.
Product Usage Instructions
English:
- Pound the stake into the ground.
- Thread the fixture into the stake.
- Coil any extra wire for future servicing.
- Use a voltmeter to ensure the voltage at the fixture is between 11 to 15 V.
- Connect the wiring with a waterproof connector.
- Refer to the diagram for servicing.
French:
- Enfoncez le piquet dans la terre.
- Fixez le luminaire sur le piquet.
Russian:
- Вбейте стакан в землю.
- Ввинтите светильник в стакан.
Spanish:
- Entierre la estaca en el suelo.
- Enrosque la luminaria a la estaca.
German:
- Setzen Sie den Pfahl in den Boden ein.
- Schrauben Sie die Leuchte auf den Pfahl.
Note: The instructions for French, Russian, and Spanish languages are incomplete in the provided text.
INSTALLATION
- Pound stake into ground.
- Thread fixture into stake. Coil extra wire for future servicing.
- Use voltmeter to ensure 11 to 15 V at fixture.
- Connect wiring with waterproof connector.
- Follow diagram for servicing.
CIRCUITING GUIDELINES
Recommendations pour
TRANSFORMERS
-
Single transformer: When using one transformer, center the transformer on the wattage load. Minimize all cable runs to reduce voltage drop.
-
Multiple transformers: When using multiple transformers, spread the load evenly across all transformers. Avoid voltage drop by installing the transformers as close to the fixtures as possible.
-
Please read and keep all safety and use instructions. If you have questions, contact your local distributor or visit the online support section at fxl.com/support.
WARNING – To reduce the risk of FIRE OR INJURY TO PERSON:
- Turn off/unplug and allow to cool before replacing lamp.
- Lamp gets HOT quickly. Contact only switch/plug when turning on.
- Do not touch hot lens, guard, or enclosure.
- Keep lamp away from materials that may burn.
- Do not touch the lamp at any time. Use a soft cloth.
- Oil from skin may damage lamp.
- Do not operate the luminaire fitting with a missing or damaged shield.
WARNING – Risk of Electric Shock
- May be installed less than 5′ (1.5 m) from a pool, spa, or fountain when used with a UL 379 listed transformer.
- A luminaire shall not use tungsten halogen lamps unless the luminaire is marked for such lamps.
- Supply connection and electrical components are located above ground level, except for secondary cord that is suitable for wet locations.
LOW-VOLTAGE CABLE SHALL:
- Be protected by routing in close proximity to the luminaire or fitting, or next to a building structure such as a house or deck.
- Not be buried except for a maximum 6″ (152 mm) in order to connect to the main low-voltage cable.
- Have the length cut off so that it is connected to a connector within 6″ (152 mm) from a building structure, a luminaire, or fitting.
These products contain a light source of energy efficiency class F.
fxl.com/support
LANDSCAPE & ARCHITECTURAL LIGHTING | Learn more. Visit
fxl.com