Belkin F5L009EA Network USB Hub User Manual

Belkin F5L009EA Network USB Hub

Introduction

Congratulations and thank you for purchasing the Network USB Hub (the Hub) from Belkin. By connecting to your network router, this innovative sharing tool gives you a great way to enhance its capabilities, as well as those of all the USB devices connected throughout your network. It lets you access your USB devices remotely without the hassle of setting up network software. Now you can easily print to the USB printer in your home office from your living room or bedroom—through any wireless router.

Setting Up your Network USB Hub

The Hub works with Windows® XP and Windows Vista™ (32-bit). In order to use the Hub, you must have a networking router connecting your network.

1. Preparing for Setup
   NOTE: If you are connected to a network router that uses Dynamic Host Configuration Protocol (DHCP), which most networks do, you do not need to set up your Hub.

2. Plug the AC adapter into the Hub.

3. Check the Power LED (green). It should be illuminated.

4. Plug the Ethernet cable into the Hub.

5. Plug the other side of the Ethernet cable into your network router.

6. Installing the Software
   IMPORTANT: If you do not install the software on your PC, the Hub will not work.

7. Insert the setup CD into your CD-ROM drive. You will see the Hub Setup CD screen. Click “Install Control Center”.
   

8. You will see the “Welcome” screen. Click “Next”.

9. You can change the destination folder for installing the software. Click “Next”.

10. You can change the group name for the program folder. Click “Next”.
    

11. Start the installation. Click “Start”.

12. Installation is complete. Click “Finish”.
    

Using the Network USB Hub Control Center

Once the setup is completed, launch the Belkin Network USB Hub Control Center through the “Start” menu. The main Control Center (see image below) gives you a visual depiction of your connection configuration.

You can connect to a device by double-clicking the device on the list, or by selecting it on the list, and then clicking “Connect”, on the bottom of the screen. To disconnect a device, just double-click it on the list, or select it and then click “Disconnect”, on the bottom of the screen. You can change device names, settings, and more by selecting the device from the list, and then clicking “Properties”.

What the designations mean

• Device: Name of the device. You can change the name by clicking “Properties”.

• Status: Status of the device. The status changes automatically.

• Connected to this computer: Devices shown are currently connected to the computer that you are using.

• Type: Category of the device. This is detected automatically.

• Automatically connect: This allows the PC to automatically connect to this device. This can be enabled or disabled in “Properties”.

• Hub ID: The ID of the Hub into which the device is plugged. This is detected automatically.
  

• Not Connected: It is available for you to use. You can connect to this device by double-clicking the bar or by clicking “Connect”.
  

• Not Connected: The device is being used by someone else and it is not available. You can make a request for the device by clicking “Request Use”.
  

• Unavailable: The device has been disconnected from the Hub. It will be removed from the list when you click “Refresh”.

Requesting a device when it is being used by someone else

If someone else is connected to a device that you want to use, you can make a device request. Right-click on the device in the list and select “Request Use” from the pop-up menu, or, you can select the device from the list and click
“Request Use”.

“Device Request” displays a message on the other user’s computer screen that looks like this:

• The user of the other computer must accept the request, by clicking “Yes”, in order to make it available to you.

When the other user clicks “Yes”, the device will be disconnected automatically from that user’s computer and it will be available for you to use.

Changing the connection settings

You can set the Control Center to automatically connect to devices when the software launches. Selecting “Automatically Connect” simplifies the overall experience for most users; however, it may not be a suitable default setting if the devices are shared among many users.

To change the connection setting, right-click on the device name in the list and click “Properties”, select it, and then click “Properties”.

Click on the “Connection” tab and check or uncheck the box next to “Automatically connect this device when the Control Center starts”, depending on whether or not you want to automatically connect the device on start-up, then click “Apply”.

Sharing a USB printer

You can set the Network USB Hub Control Center to share any USB printers on the network.
Note: You must install the printer driver on your computer before enabling sharing.

1. First, connect to the printer.
   

2. Install the printer driver that came with the printer.

3. Repeat steps 1 and 2 on the other computers that will share the printer.

4. Right-click on the printer from the list and click “Properties”, or select the printer from the list and click “Properties” on the bottom.
   

5. Click on the “Connection” tab and check the box next to “This is a shared printer…”.

6. Select the printer from the list. It should match the correct printer.

7. Click “Apply”.

8. Repeat steps 5–7 on the other computers that will share the printer.
   

Changing the Network USB Hub Control Center settings

Click the “General” link, under “Common Tasks” on the left of the “Control Center” screen to open the “Network USB Hub settings” window.

Simply check or uncheck the box to determine whether you want to launch the Network USB Hub Control Center when Windows starts. Checking “Show the Hub Control Center” causes the “Control Center” screen to display when you launch Windows.

Appendix

Operation/Compatibility Notes

Certain USB devices may not be compatible with the Hub. Since the Network USB Hub uses virtual network technology, some USB devices (e.g., TV tuners, webcams, and USB audio devices) may not be compatible with it. You may see a warning message like the one illustrated below.

WLAN connection
The Network USB Hub’s virtual network technology may not work properly if the WLAN connection is interrupted. If you have problems with the Network USB Hub or connected USB devices, please make sure that your WLAN connection is strong and stable.

The Network USB Hub can support up to 16 connections
Virtual network technology limits the number of devices the Hub can support to 16 total connections.
( Important: One connection does not equal one device; some devices involve more than one connection. For instance, a multifunction printer is typically comprised of four connections.)

The Network USB Hub and VPN
Since VPN filters the connection between the computer and other network devices, the Hub may not work with VPN enabled. If you experience difficulty with the Hub’s operation, disable the VPN connection while using the Hub.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY

We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product:

F5L009 to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.

CE Declaration of Conformity

We, Belkin International, Inc., declare under our sole responsibility that the F5L009, to which this declaration relates, is in conformity with Generic Emissions Standard EN55022:1998 Class B, EN50081-1, and with Generic Immunity Standard EN50082-1:1992. Belkin International, Inc.,

Limited Lifetime Product Warranty

What does this warranty cover?
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is.
Belkin warrants the Belkin product for the lifetime of the product.

What will we do to correct problems?
Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed,  altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God (other than lightning) such as flood, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to get service.
To get service for your Belkin product you must take the following steps:

1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information:
   • a. The part number of the Belkin product.
   • b. Where you purchased the product.
   • c. When you purchased the product.
   • d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim.

Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have.

How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.

Belkin Tech Support

• US: 800-223-5546, ext. 2263 310-898-1100, ext. 2263
• UK: 0845 607 77 87
• Australia: 1800 235 546
• New Zealand: 0800 235 546
• Singapore: 800 616 1790
• Europe: www.belkin.com/support

FAQ’s

What is the Belkin F5L009EA Network USB Hub?

You can share USB accessories, including printers and external hard drives, over a network with the Belkin F5L009EA Network USB Hub. Multiple users can access and use the attached USB devices thanks to its connection to your network router.

How do I set up the Belkin F5L009EA Network USB Hub?

It is simple to set up the hub. Simply use an Ethernet wire to connect the hub to your network router, then attach your USB devices to the hub. You can begin sharing USB devices over your network once you've installed the accompanying software on your PC.

What type of USB devices can I connect to the hub?

A wide variety of USB devices, such as printers, scanners, webcams, external hard drives, and more, are supported by the F5L009EA Hub. It works with USB 2.0 and USB 1.1 devices alike.

Can I share USB devices between Windows and Mac computers?

It is true that the Belkin F5L009EA supports both Windows and Mac operating systems, enabling easy USB device sharing between several platforms.

Do I need to install drivers for the connected USB devices on each computer?

No, drivers do not need to be installed on every machine. The USB devices can be simply attached to the hub, and they will function with the linked PCs because the F5L009EA handles the essential driver communication.

How many USB devices can I connect to the Belkin F5L009EA Network USB Hub?

Five USB devices can be supported by the hub. You can distribute peripherals across your network by connecting many at once.

Is the network USB connection secure?

Yes, the F5L009EA Hub includes cutting-edge security features including data encryption and password protection to guarantee that your shared resources are safe and secure.

Can I access the connected USB devices remotely?

Yes, even if they are physically connected to the hub on a different computer, the offered software enables you to access and utilize the linked USB devices from any computer inside your network.

Can I disconnect USB devices remotely?

Yes, the software gives you the option to unplug USB devices from any networked computer, giving you more flexibility and control.

Can I share a USB device while another computer is using it?

Multiple users can access and utilize the same USB device simultaneously thanks to the Belkin F5L009EA Hub's functionality for simultaneous USB device sharing.

Does the F5L009EA work with wireless networks?

The hub doesn't support direct wireless connections because it uses an Ethernet cable to connect to your network router. However, if your network is wireless, you can still use the network to access shared USB devices remotely.

Is the Belkin F5L009EA Network USB Hub compatible with older USB devices?

Yes, the hub is backward compatible with USB 1.1 devices, making it possible to exchange and access even older peripherals across the network.

References:Belkin F5L009EA Network USB Hub – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>