Regulus KPS11 Solar Thermal System Instructions
- June 12, 2024
- Regulus
Table of Contents
Regulus KPS11 Solar Thermal System Instructions
KPS11 SOLAR COLLECTOR
Flat plate collector of 1802 W output (at 1000 W/m2 irradiance), designed for on-roof portrait installation. A harp absorber with highly selective TiNOx surface is laser welded to the copper pipes. The insulation consists of 40mm mineral wool. Connections are located on both sides on the top and bottom.
Code: 16278
The Connection kit contains an inlet elbow (Cu22 x 3/4“ F), outlet pipe cross (Cu22 x 3/4“ F + 3/8“ F for an air vent valve and 1/2“ F for a temperature sensor sheath), sheath with a temperature sensor and 2 straight adapters (Cu22 x 3/4″ F) with a plug and gaskets.
The mount and connection kits consist of aluminum mounting rails, retaining hooks for bottom mounting rails, retaining side clamps, bolts and nuts, straight fittings (2 and more collectors) and pipe insulation.
regulus.eu
SOLAR THERMAL SYSTEM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>