baby trend BT08xxx Morph Infant Car Seat Adapter Instruction Manual
- June 12, 2024
- baby trend
Table of Contents
baby trend BT08xxx Morph Infant Car Seat Adapter
Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR. The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limitedwarranty for complete warranty details.
WARNING
-
WARNING: Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference.
-
WARNING: To avoid serious injury from falling, ALWAYS use the safety belt to secure the car seat.
-
WARNING: Care must be taken when assembling and disassembling the product onto the stroller to prevent finger entrapment.
Follow all the instruction and warning for TS11/ST11 to ensure the safety of your children. Do not use when the combined weight of the infant car seat shell and weight of the child is over 50 lbs.; Do not use when the weight of the child over car seat weight limitations. Maintenance: To clean, use only mild household soap or detergent and warm water on a sponge or clean cloth. Check your product for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed. The Customer Service Department can be contacted at 1(800) 328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). -
IMPORTANT! To ensure safe operation of your stroller, please follow these instructions carefully. Please keep these instructions for future reference.
-
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
-
IMPORTANT! Adult assembly is required. Keep child away during unpacking and assembly.
ADDITIONAL ACCESSORIES
Universal car seat adapter – mesh bottom cover (visit babytrend.com for compatibility chart)
This adapter type is only compatible with Morph Single Double Modular Travel System and Stroller (TS11, ST11). For stroller, car seat instruction manual and compatibility chart (visit babytrend.com).
UNIVERSAL CAR SEAT ADAPTER
If received unattached, follow below instructions to attach: Unfold the
adapter and place it on a flat surface (Fig. 1a).Connect both ends of the
adapter bars together as shown on (Fig. 1b). Ensure both pins click into the
holes. Wrap all (4) panels over the bar and attach with the hook and loop
(Fig. 1c). Face the front of the adapter to the front of the stroller. Align
the car seat adapter to the stroller frame connections until it clicks (Fig.
1d).
NOTE: ONLY use middle position connections.
WARNING: Always insure infant car seat is properly positioned, secured
with the safety strap with the seat back NOT positioned too upright. The
child’s head should sit back against the seat. If the seat back is positioned
too upright, a newborn to six months old child’s head could fall forward
.
IMPORTANT! Infant car seat sold separately. (See Babytrend.com for list
of compatible Infant Car Seats). Attaching the Car seat: Place the car seat
onto the Car Seat Adapter. The front of the car seat should be facing the same
direction as the adaptor buckle (Fig. 1e). Strap the Safety Belts through the
Belt Path on the Car Seat and connect the buckles together (Fig. 1f). Tighten
the strap so it fits snugly and the car seat is secured to the frame. The
Safety Belt MUST ALWAYS be installed through the Belt Path before using this
product.
Removing the Car seat:
Unbuckle the car seat safety belt buckle first (Fig. 1g). Remove the car seat
safety belt and remove the car seat from the adapter (Fig. 1h).
Car seat Adapter Removal:
Press both of the release buttons on each side (Fig. 1i).
WARNING! These are the ONLY approved use modes. Failure to follow these instructions could result in serious injury or death.
RIDING POSITIONS
-
Car Seat Adapter – Single Mode
Toddler Seat with Universal Car Seat Adapter – 3 Modes -
Car Seat Adapter – High Position Toddler Seat – Low Position – Forward Facing
-
Car Seat Adapter – High Position Toddler Seat – Low Position – Rear Facing
-
Car Seat Adapter – Low Position Toddler Seat – High Position – Rear Facing
Infant Car Seat with Car Seat Adapter – 4 Modes -
Car Seat Adapter – High Position Car Seat – Low Position – Forward Facing
-
Car Seat Adapter – High Position Car Seat – Low Position – Rear Facing
-
Car Seat Adapter – Low Position Car Seat – High Position – Forward Facing
-
Car Seat Adapter – Low Position Car Seat – High Position – Rear Facing
Bassinet with Car Seat Adapter – 2 Modes -
Car Seat Adapter – High Position Bassinet – Low Position – Rear Facing
-
Car Seat Adapter – Low Position Bassinet – High Position – Rear Facing
Car Seat Adapter with Bench & Stand Board -
Car Seat Adapter – Low Position Child on Bench
-
Car Seat Adapter – Low Position Child on Stand Board
- Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
- Baby Trend, Inc. 13048 Valley Blvd.B Fontana CA 92335
1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST) www.babytrend.com
References
- Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
- Limited Warranty Coverage – Baby Trend
- Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>