Fronius TransSteel 2200 Single Phase Multi Voltage Welder User Guide

Fronius TransSteel 2200 Single Phase Multi Voltage Welder

Product Information

The TransSteel 2200 is a welding device that offers synergic welding capabilities. It is designed to provide efficient and precise welding results. The device has multiple operating modes and settings to accommodate various welding requirements.

Safety Precautions

Before using the device, it is important to read and understand all the provided documents, both in hard copy and online. This quick guide does not cover all the functions of the device. For a complete description and instructions, please refer to the Operating Instructions.

Safety

• Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.
• This document does not describe all the functions of the device. For a complete description of the device, refer to the Operating Instructions.

Using Instructions

Set the synergic welding process

• Synergic: When setting a welding power parameter, the remaining parameters are set automatically.
• Stick: MMA welding
• TIG: TIG Welding
• Manual: The welding power parameters can be adjusted individually.

Set the filler metal and shielding gas

Set the operating mode

• 2-step mode: short weld seams, tacking work
• 4-step mode: longer weld seams, high level of comfort
• Special 4-step mode: additional settings for starting and final current
• Spot welding: for overlapping sheets / stitch welding: light-gauge sheet metal welding and air-gap bridging

Set the welding power

• Sheet thickness

• Welding current

• Wire speed

• select desired parameter

• set desired parameter

Set the correction parameters

• Arc length correction

• Welding voltage

• Arc-force dynamic

• select desired parameter

• set desired parameter

Optimize welding results

1. Measure the welding circuit resistance
2. Set the mains fuse so that the device switches off before the mains fuse trips.

The description of the aforementioned measures can be found in the Operating Instructions of the power source.

Operating Instructions

• https://manuals.fronius.com/html/4204260241

Setup Menu

MIG/MAG Synergic Setup Menu

Setup Menu 1st Level

• Gas pre-flow time
• Gas post-flow time
• Slope (2-step, special 4-step)
• Starting current (2-step, special 4-step)
• Final current (2-step, special 4-step)
• Starting current duration (2-step)
• Final current duration (2-step)
• Wire threading speed
• Length of wire that is fed before the safety cut-out trips
• Spot welding time/stitch welding time
• Interval pause time
• Operating mode for stitch welding
• Restore factory setup

Setup Menu 2nd Level

• Country-specific setting
• Welding circuit resistance
• Welding circuit inductivity
• Real Energy Input
• Mains fuse protection
• Arc length correction display

MIG/MAG Manual Setup Menu

Setup Menu 1st Level

• Gas pre-flow time
• Gas post-flow time
• Wire threading speed
• Trigger current
• Length of wire that is fed before the safety cut-out trips
• Spot welding time/stitch welding time
• Interval pause time
• Operating mode for stitch welding
• Restore factory setup

Setup Menu 2nd Level

• Country-specific setting
• Welding circuit resistance
• Welding circuit inductivity
• Real Energy Input
• Mains fuse protection

MMA Setup Menu

Setup Menu 1st Level

• HotStart current
• HotStart time
• Anti-Stick
• Restore factory setup

Setup Menu 2nd Level

• Country-specific setting
• Welding circuit resistance
• Welding circuit inductivity
• Mains fuse protection

TIG Setup Menu

Setup Menu 1st Level

• Pulse frequency
• UpSlope
• DownSlope
• Starting current
• Reduced current
• Final current
• Gas post-flow time
• Tacking
• Restore factory setup

Setup Menu 2nd Level

• Country-specific setting
• Mains fuse protection

EasyJobs

• Retrieve
• Save
• Delete

Exiting the Setup Menu

Activating/Deactivating the Key Lock

Displaying Service Parameters

Available parameters

• Firmware version
• Welding program configuration
• Current welding program
• Arc time in hours
• Motor current for wire drive in amperes
• 2nd menu level (service)

Example of display

Documents / Resources

| Fronius TransSteel 2200 Single Phase Multi Voltage Welder [pdf] User Guide
TransSteel 2200 Single Phase Multi Voltage Welder, TransSteel 2200, Single Phase Multi Voltage Welder, Multi Voltage Welder, Voltage Welder
---|---

References

• Download Search - Fronius

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>