TAURUS 1600 Power Shake Instruction Manual

JAR BLENDER
POWER SHAKE 1600
Instructions for use (Original instructions)

1600 Power Shake

|
---|---

DESCRIPTION

A. Measuring cup
B. Jar lid
C. Jar
D. Sealing ring
E. Blade set
F. Blade fixing ring
G. Motor body
H. Illuminated ring
I. Speed selector
J. Pulse / ice crush position
If the model of your appliance does not have the accessories described above, they can also be bought separately from the Technical Assistance Service.

USE AND CARE

• Fully extend the appliance’s supply cord before each use.
• Do not use the appliance if the parts or accessories are not properly fitted or are defective.
• Do not use the appliance while the jar is empty.
• Do not move the appliance while in use.
• Do not turn the appliance over while it is in use or connected to the mains.
• Do not force the appliance’s work capacity.
• Respect the MAX level indicator. (1750 ml).
• When using hot liquids, do not fill the jar more than halfway. At all times, when mixing hot liquids in the jar, select the slowest speed on the speed selector.
• Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
• Keep the appliance in good condition. Check that the moving parts are not misaligned or jammed, and make sure there are no broken parts or anomalies that may prevent the appliance from operating correctly.
• Use the appliance and its accessories and tools in accordance with these instructions, taking into account the working conditions and the work to be performed. Using the appliance for operations different from those intended could result in a hazardous situation.
• Avoid using extremely hot liquids in the unit.
• Do not use the jar immediately after taking it out of the dishwasher or the refrigerator. Ensure that the jar is at room temperature.
• Check that the lid is closed properly before starting the appliance.
• Never leave the appliance connected and unattended if it is not in use. This saves energy and prolongs the life of the appliance.
• Do not use the appliance for more than 1 minute at a time. In case of operating in cycles, allow the appliance a resting period of at least 1 minute between each cycle. Under no circumstances should the appliance be operated for more time than necessary.
• As a reference, in the annexed table appears several recipes that include the amount of food to process and the operating time of the apparatus.
  Ingredient| Max. Quantity| Duration
  ---|---|---
  All types of liquid| 1,75 l| 10 s
  Carrots and water mixture| 700 g carrots, 1,05 l water| 1 min
  Ice| 4 cubes at one time, OR add 1 cube each time| 20 s (Operating cycles of 3 s)
• Do not use the appliance with frozen goods or those containing bones.
• CAUTION: Do not use the appliance if the glass is cracked or broken.

INSTRUCTIONS FOR USE BEFORE USE

• Make sure that all products’ packaging has been removed.
• Please read the “Safety advice and warnings” booklet before first use carefully.
• Before using the product for the first time, clean the parts that will come into contact with food in the manner described in the «Cleaning» section.

USE

• Extend the supply cord completely before plugging it in.
• Ensure the blade fixing ring is fixed properly to the jar (by turning counterclockwise) before putting it on the motor body. (Fig. 1).
• Fit the jar onto the motor body. (Fig. 2).
• Put the ingredients, after having first chopped into small pieces, into the jar with liquid (do not exceed the maximum marker).
• Put the lid on the jar. Make sure it is properly fixed in place.
• Put the measuring cup on the lid.
• Connect the appliance to the mains.
• Choose the desired speed and start blending.
• If you wish to add more ingredients, pull out the measuring cup.
• Add the ingredients and replace the measuring cup.
• To stop the appliance, set the speed back to “0”.
• Turn the appliance on by selecting the desired speed in the speed selector.
• The illuminated ring comes on. (H).
• To avoid a fierce start-up, it is advisable to start off from the lowest speed position and, once the appliance has been switched on, progressively increase the speed to the desired position.

ELECTRONIC SPEED CONTROL

• The speed of the appliance can be regulated by using the speed selector (I). This function is very useful, as it makes it possible to adapt the speed of the appliance to the type of work that needs to be done.

ONCE YOU HAVE FINISHED USING THE APPLIANCE

• Stop the appliance, selecting position “0” on the speed selector.
• Unplug the appliance from the mains.
• Lift the jar from the motor body.
• Clean the appliance.

“PULSE / ICE CRUSH” FUNCTION

• The appliance works at the highest speed to achieve optimal performance.
• Press this button to operate and release the button when you wish to stop operating.
• This function gives optimal results for ice-crushing up to desired snowy level.
• We recommend working by pressing the button in cycles of 3 seconds, and repeating the operation until you obtain the desired result.

SUPPLY CORD COMPARTMENT

• This appliance has a supply cord compartment situated on its underside.

CLEANING

• Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.

• Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry it.

• Do not use solvents or products with an acid or base pH, such as bleach, or abrasive products, for cleaning the appliance.

• Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the appliance.

• Never submerge the appliance in water or any other liquid or place it under running water.

• During the cleaning process, take special care with the blades, as they are very sharp.

• It is advisable to clean the appliance regularly and remove any food remains.

• If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect the duration of the appliance’s useful life and could become unsafe to use.

• The following pieces may be washed in a dishwasher (using a soft cleaning program) or soapy hot water:
  – Jar
  – Lid
  – Measuring cup

• Then dry all parts before their assembly and storage.

SELF-CLEANING FUNCTION

• Put water and a small amount of washing-up liquid in the jar.
• Select the function “Pulse”.

REMOVABLE BLADES FOR EFFECTIVE CLEANING

• Loosen the blade fixing ring by turning it in a clockwise direction. (Fig. 3). Remove the blade fixing ring, blade set and sealing ring, and clean them. (Fig. 4).
• After cleaning, replace the blade set and turn the blade fixing ring in the opposite direction.

www.taurus-home.com 16/06/2023 – Page Size A5

References

• Taurus

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>