zelmer ZSVC825 WOJTEK Cordless Vacuum Cleaner User Manual

zelmer ZSVC825 WOJTEK Cordless Vacuum Cleaner

Product Information

Product Usage Instructions

Charging the Device:

1. Before first use, charge the battery for at least 3.5 hours. The device can be charged in two ways: Method 1 (FIG. 4) and Method 2 (FIG. 5). Note: The device cannot be used while charging.
2. During charging, the power indicator(s) will flash and turn solid white when fully charged.
3. The power indicator(s) will flash when the battery level is low.

Maintenance:

To maintain optimal performance, regularly clean and maintain the device according to the following instructions. The frequency of cleaning/replacement depends on usage.

Cleaning the Rotating Brush:

1. Turn off the vacuum cleaner and press the floor brush release button to remove it from the metal tube (FIG. 18).
2. Press the rotating brush release button to release the brush belt (FIG. 19).
3. Remove the brush belt and lift the brush to take it out (FIG. 20).
4. Clean the rotating brush using scissors or other tools, rinse it, and let it air dry (FIG. 21).
5. Reinstall the rotating brush by first inserting the fixed protruding end, then pressing it into place until it clicks (FIG. 22).
6. Engage the brush belt until you hear a click (FIG. 23).

Troubleshooting:

If the vacuum cleaner automatically shuts off, it may be due to blockages, battery issues, or overheating. Perform the following steps:

1. Turn on the vacuum cleaner and check the battery indicators. If charging is necessary, connect the turned-off vacuum cleaner to power.
2. Check the metal tube, accessories, and openings for any obstructions and remove them.

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE

WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE

DESCRIPTION

1. Battery pack
2. Main body
3. Dust container
4. Metal tube
5. Power brush
6. HEPA filter
7. Metal filter
8. 2in1 tool
9. Crevice tool
10. Holding rack Main machine
11. LED screen
12. Control buttons
13. Charging indication light
14. Charging socket LED screen
15. Indication for power level
16. Indication of instant energy volume Control panel
17. Power level +/-
18. ON/OFF button

Note!
Accessories may work onto tube or main machine.

SAFETY INSTRUCTIONS

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• The adaptor cable cannot be replaced.
• If the cable is damaged, the adaptor will be discarded.
• WARNING : For the purpose of recharging the battery, only use the detachable supply unit provided with this appliance.
• This symbol means that the appliance is intended to be supplied from a detachable supply unit.
• The appliances contains batteries that are only replaceable by skilled persons.
• This appliance contains batteries that are not replaceable.
• Plug must be removed from socket-outlet before cleaning or maintaining the appliance.
• Follow the charging the product instructions in order to charge it.
• Due to the plastic housing of the vacuum cleaner, keep the appliance away from all heat sources (radiators, stoves, etc.).
• Do not block the vacuum cleaner inlet and outlet openings!
• Turn off the vacuum cleaner before replacing equipment.
• This appliance is intended for use at a maximum altitude of 2000m above sea level.

IMPORTANT WARNINGS

• Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label.
• The mains connection cable must not be tangled or wrapped around the product during use.
• Do not pull on the connection cord in order to unplug it.
• Do not use, connect or disconnect the device to the mains with your hands or feet wet.
• Proceed according to the conservation and cleaning section of this manual for cleaning.
• Unplug the product immediately from the mains in the event of any breakdown or damage and contact an authorised Technical support service.
• In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the brand´s Official Technical support service may carry out repairs or procedures on the device.
• Any incorrect use or improper handling of the product shall render the warranty null and void. Only an authorised technical support service centre may carry out repairs on this product.
• This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial use. In case of misuse or tampering with the product, it will be out of warranty.
• Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc), incandescent objects (matches, cigarettes).
• Never use the turbobrush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects, such as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass, etc), flour, cement, plaster, printer or photocopier toner, etc.
• B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

INSTRUCTION OF USE

Wall Mounting

• The vacuum cannot stand on its own. Make sure it is mounted securely.
• Attach the handle as shown in Fig. 1A or Fig.1B (Do not stick to rough or uneven surface like brick, porous aluminum or stucco surfaces.)
• Attach the bracket at the height of 107cm / 3.5ft (Fig. 2)

Assembling

Attach your desired cleaning accessory to the metal tube or main unit of the vacuum as illustrated (FIG.3)

Operating guide

• On/off button: press it to power on or power off this vacuum cleaner.
• Switch among power levels: press button of ‘+’ to increase vacuum suction, press button of ‘-‘ to decrease vacuum suction.

Indication of instant energy volume: may show instant energy volume during both vacuum working and whole process of battery charging.

• SUPER power level
• STANDARD power level
• ECO power level

Charge your vacuum

• The vacuum is powered by the built-in lithium battery. Before firsy use, charge the battery for at least 3,5hours.
• You can charge the battery in two ways. Method 1 (FIG.4), method 2 (FIG.5)

Notes:

• The vacuum cannot work while charging
• The power indicator(s) is(are) flashing during charging and stay white when fully charged.
• The power indicators flash when the battery is low
• The vacuum cannot be charged when the ambient temperature is below 10°C/50°F or above 45°C/113°F

Maintenance

For optimal performance, follow the instructions below to clean and maintain the vacuum regularly. The cleaning/replacement frequency will depend on your usage habits of the vacuum.

Recommended cleaning/replacement frequency

months
HEPA filter| Once every week (Twice a week if you have a pet)| Every 3-6 months
Rolling Brush| Once every week| Every 6-12 months

Clean the dust box and filters

Caution
Turn off the vacuum before cleaning it.
If the dust box is filled with dust, the vacuum may stop to prevent overheating Clean the dust box before it fills to the MAX line.

1. Dissemble the metal tube (FIG.6)

2. Press the dust empty button to empty the dust box (FIG.7)

3. Press and hold the dust box release button and turn the dust clockwise to release it (FIG.8)

4. Turn the metal filter clockwise to release it (FIG.9)

5. Turn the HEPA filter clockwise to release it (FIG.10)

6. Shake off debris by tapping the filters against your trash container (FIG.11)

7. Rinse the dust box and filters (FIG.12)
   Note : Do not use a brush, hot water or any detergent to clean the filters

8. Air-dry the dust box and filters completely before reassembly (FIG.13)
   Caution : Keep away from direct sunlight. All parts must be completely dry before reassembly

9. Install the sponge filter on the HEPA filter and turn the HEPA filter counter-clockwise to install it in the, metal filter (FIG.14)

10. Turn the metal filter counter-clockwise to install it in the main unit. (FIG.15)

11. Make sure that the grooves on the dust box are aligned with the buckles on the main unit and then push the dust box upward into the main unit. (FIG.16)

12. Turn the dust box counter-clockwise until you hear a click (FIG.17)

Clean the rolling brush

1. Turn off the vacuum, press the floor brush release button to remove the floor brush from the metal tube (FIG.18)
2. Press the rolling brush release button to release the rolling brush locking strip. (FIG.19)
3. Take out the rolling brush locking strip and lift the rolling brush to remove it. (FIG.20)
4. Clean the rolling brush using scissors or other tools, rinse and then air-dry the rolling brush (FIG.21)
5. Reinstall the rolling brush by inserting the fixed protruding end first, then clicking into place. (FIG.22)
6. Push the rolling brush locking strip in until you hear a click (FIG.23)

Troubleshooting

be full; empty the dust box.

• Check crevice tool nozzle and floor brush for blockages; clear blockages if required.

• Remove any string, carpet fibers or hair that may be wrapped around the rolling brush

• Check connection between the main unit and metal tube for blockages; clear blockages if required.

• Check the metal tube for and clear any debris

• Check filters to see if they need cleaning. Follow instruc- tions for rinsing and completely air-drying the filters before reassembling.

Vacuum turns off on its own.| There are several possible reasons for the vacuum turning off on its own, including blockages, battery issues and overheating. If vacuum turns off on its own, perform the following steps:

1. Turn on the vacuum and check the battery indicator lights. If recharging is needed, plug in while vacuum is off.

2. Empty the dust box and clean the filters.

3. Check the metal tube, accessories and intel openings and remove any blockages.

4. Allow the main unit of the vacuum to cool for at lease

5. 4 minutes, until they return to room temperature.

6. Restart the vacuum.

PRODUCT DISPOSAL

• This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), and provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead go to the electrical and electronic waste collection center closest to your home.
• The product may contain batteries. Remove them before disposing of the product and dispose in special containers approved for this purpose.

WARRANTY REPORT

B&B TRENDS, S.L. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of a breakdown during the term of this warranty, users are entitled to repai or else te replacement of he product at no charge in the former is unavailable, unless one o these conditions proves impossible to lull or is cisorooortonale. In this case, you can then op or a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers the replacement o spare parts provided that the products have been used according to the recommendations specified in this manual for both cases and have not been tampered with by any third party that is not authorized by B&B TRENDS, S.L. The warranty will not cover any parts subject to wear and tear. This warranty does not allege your nans as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY

Customers must contact a B&B TRENDS, S.L. authorized Technical Service for the repair of the product. Since any tampering of the same by anyone not authorized by bas TRENDS, S.., or the careless or more use of the same shall render this warranty null and void. The warrant must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this wolf ally.
This warranty should be retained by the user as well as the invoice, receipt or delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at wy.zelmer.com

SERIES : ZSVC. MOD: ZSVC825 WOJTEK
25.9V
Type : S7C
Made in China
B&B TRENDS, S.L.
C. Cataluña, 24 · P.I. Ca N’Oller 08130 Santa Perpètua de Mogoda (Barcelona) · Spain
WWW.ZELMER.COM

References

• Zelmer - Zelmer's official website
• Zelmer - Oficjalna strona marki Zelmer
• Zelmer - Oficjalna strona marki Zelmer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>