zelmer ZPU5500 Air Purifier User Manual
- June 3, 2024
- zelmer
Table of Contents
ZPU5500 Air Purifier
User Manual
ZPU5500 Air Purifier
WE WOULD LIKE TO THANKS YOU FOR CHOOSING ZELMER, WE WISH THE PRODUCT PERFORMS
TO YOUR SATISFACTION AND PLEASURE.
WARNING
PLEASE USE THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT.
STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE
DESCRIPTION
Body
- air outlet
- Control panel
- Lighting
- Filter
- Base
- Air inlet
Control panel
a. Power button
b. Timer button
c. Wind speed button
d. Light control button
e. Anion button
SAFETY INSTRUCTIONS
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if
they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
This device can only be used with the adaptor model supplied with the device
and powered with the safety voltage indicated in the rating label of the
device.
The adaptor cable cannot be replaced; If the cable is damaged, the adaptor
will be discarded.
Appliance must be disconnected from the supply mains prior to cleaning or
other maintenance.
This device is designed for use at a maximum altitude up to 2000m above sea
level.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for
commercial or industrial use under any circumstances. Any incorrect use or
improper handling of the product shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as
the one indicated on the product label.
The mains connection cable must not be tangled or wrapped around the product
during use.
Do not use the device, or connect and disconnect to the supply mains with the
hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a
handle.
This product cannot replace normal ventilation, daily dust collection or oil
pumping when cooking.
To prevent plastic parts from melting or catching on fire, do not place the
product near heating appliances.
Ensure both the filter and its cover is properly installed before using.
Product must be used on a level and stable surface.
Do not use outdoors.
Unplug the product immediately from the mains in the event of any breakdown or
damage and contact an official technical support service. In order to prevent
any risk of danger, do not open the device.
Only qualified technical personnel from the brand´s Official technical support
service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people,
animals or objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
Before use:
Make sure that the packaging from the filter has been removed (following the
steps for installing filter).
FILTER INSTALLATION
Ensure the appliance is unplugged before removing or installing the filter.
When the power indicator keeps flashing in red, the filter should be replaced.
Please wipe the dust on the filter regularly, do not wash or use it
repeatedly. Please use the filter specially designed for this product. Steps
for installing filter (fig.1)
Unplug the power socket of the machine before replacing or installing the
filter.
- Invert the machine and rotate the base along the direction marked “Open”.
- Take out the filter from the appliance.
- Remove the packaging filter into the item.
- Then install the filter into the machine.
- Then install the base, rotate and tighten the base along the direction marked “Close”.
Note: Please press the power button for 7 s to reset after installing a new filter, and the anion indicator light will stop flashing.
USE
When connect the appliance to the mains, the buzzer will ring for 1 second.
Button operation:
Power button (a)
Touch the power button to turn on the machine, the buzzer will ring for one
time, the power indicator and the low grade of wind speed indicator light
blue.
Touch the button again, the button again, the buzzer will ring for one time
and the machine will turn off with all the lights off.
Note:
- The machine will record the wind speed and anion function when turns off without unplugging the power socket.
- The lamp always on and the timer always off when push the power button and open the appliance.
Timer button (b)
In the condition of working, press the timer button to set among the
circulation of 2h, 4h and 8h timer with buzzer rings, and the corresponding
indicator will be on.
Press again, the timer indicator turns off and the machine will work
continuously without timer.
In the status of timing, the machine begins of count down. When the time is
up, the fan will stop working and all the lights will be off.
Wind Speed button (c)
In the condition of working, press the wind speed button, the buzzer will ring
for one time when the machine is on.
L: low wind speed
H: high wind speed
Auto: auto wind speed. The appliance will work according to the air
quality of the room.
Press again to adjust the wind speed among the circulation of low, middle ,
auto grade with buzzer rings, the corresponding indicator will be on, when the
machine is on.
Light control (d)
When press light button (d) one time, the light is on.
When press light button (d) button for the second time, the light is off.
When press light button (d) for 3rd time, the light gets stronger.
Anion function (e)
Press anion button (e) again, the Anion function will be off and the Anion
lamp is off when the machine is on.
Press anion button (e) one time, the Anion function is on and the Anion lamp
is on when the machine is on.
Dust Sensor
The brightness of the lighting will change as per as the air quality in the
room
- Blue represents good air quality
- Orange represents fair air quality
- Red represents poor air quality.
REMINIDER OF REPLACING FILTER
When the machine detects the filter is saturated, the power indicator will
keep flashing.
Please press the power button for 7 seconds to reset after installing a new
filter.
MAINTENANCE AND CLEANING
Ensure the item is power off and unplugged before starting any cleaning tasks.
Do not immerse the machine into water or any other liquid.
Do not use abrasive, corrosive or flammable cleansers (such as bleach or
alcohol) to clean any part of the unit.
Do not use a vacuum cleaner to clean the filter or wash it directly.
Use a soft cloth with neutral cleanser to clean away any dust or debris from
the surface of the unit and air inlet/outlet.
After the machine completely dry out, store it in a cool and well ventilated
place.
If you do not use it for a long time, in the basic of previous steps, please
turn out the machine for a few minutes from time to time to ensure a good
performance.
Note: Do not drop any water into the machine.
TROUBLESHOOTING
| Situation | Cause | Solution |
|---|---|---|
| No Working | • Is it plugged into a power soc- ket? Is there a power outage? |
• Is the home leakage switch or fuse cut off?
• Is the filter replacing keep flashing| • Plug the appliance on
• Put the leakage switch or fuse in on position
• Replace the filter
Poor performance| • Is there any dust in the surface of pre filter?
• Is there any obstacle blocking the air inlet/outlet?| • Clean the filter as
per as cleaning paragraph
• Remove the obstacle
Noisy| • Is there anything stuck on the fan in the air outlet?
• Is the machine tilted?| • Please set a lower grade of wind speed if the
noise is too loud, or set low grade of wind speed when using in bedroom at
night.
Smell coming out the appliance| • It is the normal phenomenon that the machine
emits the smell of plastic for the first time.| • The machine will emit nasty
smell if the filter is dusty, so in this situation, please clean or replace
the filter.
• If the burning smell emits from the machine, please unplug the power socket
and contact with buyer or customer service
Replacing filter reminder still flashing after user have put a new one| •
Please press the power button for 7s to reset the machine and the life counter
of the filter will start.|
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equipment),
provides the legal framework applicable in the European Union for the disposal
and reuse of waste electronic and electrical devices.
Do not dispose of this product in the bin, instead going to the electrical and
electronic waste collection center closest to your home.
WARRANTY REPORT
B&B TRENDS, S.L. guarantees compliance of this product for the use for which
it is intended for a period of two years. In the case of breakdown during the
term of this warranty, users are entitled to repair or else the replacement of
the product at no charge if the former is unavailable, unless one of these
options proves impossible to fulfill or is disproportionate. In this case, you
can then opt for a reduction in price or cancellation of the sale, which must
be dealt with directly with the sales vendor. This also covers replacement of
spare parts provided that the product has been used according to the
recommendations specified in this manual for both cases, and has not been
tampered with by any third party that is not authorised by B&B TRENDS, S.L.
The warranty will not cover any parts subject to wear and tear. This warranty
does not affect your rights as a consumer in accordance with the provisions in
Directive 1999/44/EC for member states of the European Union.
USE OF WARRANTY
Customers must contact a B&B TRENDS, S.L. authorised Technical Service for
repair of the product. Since any tampering of the same by anyone not
authorised by B&B TRENDS, S.L., or the careless or improper use of the same
shall render this warranty null and void. The warranty must be fully completed
and delivered along with the receipt or delivery docket for the effective
exercise of rights under this warranty.
This warranty should be retained by the user as well as the invoice, receipt
or the delivery docket to facilitate the exercise of these rights. For
technical service and after-sales care outside the Polish territory, please
submit your query to the point of sale where you purchased the item or check
for further aftersales information at www.zelmer.com
OLIPICTOTerlb ao3gyxa / OLimuyeaLi noeh-ps
SERIES: ZPU. MOD: ZPU5500
24V – 23W
Type: Gala
Made in China / CgenaHo B Km-rae / 3po6neHo B Km-raI
B &B TRENDS, S.L.
C. Cataluna, 24 . P.I. Ca N’011er
08130 Santa Perpetua de Mogod a
(Barcelona) . Spain
www.zelmer.com
05/2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>