VIVOTEK ND9326P 16 Channels NVR Recorder Installation Guide
- June 12, 2024
- Vivotek
Table of Contents
VIVOTEK ND9326P 16 Channels NVR Recorder Installation Guide
Warning Before Installation
- Power off the Network Video Recorder if you detect abnormal smell or smoke coming from it.
- Do not place the Network Video Recorder around the heat sources, such as television or oven
- Do not drop the Network Camera.
- PLEASE NOTE: VIVOTEK does not provide warranty or technical support for third party application software that users additionally install and run on the NVR
- Do not attempt to remove or uninstall the software on the mounted flash memory.
- Keep the Network Video Recorder away from water. If the Video Recorder is wet, power off immediately
- Do not place the Network Video Recorder in high humidity environments
Package Contents
Hardware Installation
For Taiwan RoHS related information, refer to the link below and select
Traditional Chinese to download the document.
Please do not connect the NVR’s PoE ports to non-PD* devices (such as an Ethernet switch LAN port). The Ethernet control circuits may not be compatible.
- PD = A Powered Device designed to receive power source from a PoE connection such as network cameras.
Please contact authorized distributors for warranty and RMA service.
Visit https://www.vivotek.com/support/warranty-rma
All specifications are subject to change without noice. Copyright © 2023 VIVOTEK INC. All rights reserved.
Costumer Support
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282| F: +886-2-82455532|
E: sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686| F:
408-773-8298|
E: salesusa@vivotek.com
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817
E: saleseurope@vivotek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>