YOUKAIN Light Pro 16 x Max 60W Candelabra Base Instruction Manual
- October 30, 2023
- YOUKAIN
Table of Contents
YOUKAIN Light Pro 16 x Max 60W Candelabra Base
Product Information
The product is a lighting fixture that requires electrical installation. It includes a canopy, crossbar assembly, and collar ring socket sleeves. The fixture requires 16 candelabra base bulbs, with a maximum wattage of 60W each. The product also includes hardware such as wire connectors, hex nuts, flat washers, and an outlet box screw. Safety equipment such as safety goggles and electrical tape are required during installation, but not included with the product. The manufacturer provides a one-year warranty for the product.
Product Usage Instructions
- Before installing the product, read all instructions carefully.
- Place the product on a soft, non-abrasive surface, such as carpet or cardboard, to avoid damaging it.
- Ensure that you have all the necessary tools required for installation, including a Phillips screwdriver, wire stripper, and pliers. Safety goggles are also required.
- Disconnect the power supply by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls the circuit before starting installation.
- If new wiring is required, consult a qualified electrician or local authorities for code requirements.
- Attach the mounting plate to the junction box and make all necessary electrical connections according to the wiring instructions provided.
- Determine the length of stem or chain required and attach it to the fixture.
- Hang the fixture from the ceiling and install it according to the assembly instructions provided.
- Place a safety cover over any unused outlets to protect children.
- If you have any non-electrical questions about the fixture, contact customer service via the distributor where you purchased the product.
Note that the manufacturer does not warrant any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Safety information
READ AND SAVE THESE INSTRUCTIONS
- For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
- Before touching any wire, use a voltage tester to make sure it not live.
- When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
- Use tools with insulated handles and ladders made of wood or fiberglass.
- To protect children, place a safely cover over any unused outlets.
DANGER: Before staring installation of this fixture or removal of a
previous fixture, disconnect the power by turning off the circuit breaker,
removing the fuse at the fuse box, or tripping the breaker that controls that
circuit. Tape a sign to the panel warning others to leave the circuit alone
while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. lf you have any non-electrical questions about this fixture please
contact our customer service via the distributor where you purchased this
product from. We will be more than happy to assist.
Pre-installation
PLANNING INSTALLATION
Read all instructions before installing. To avoid damaging this product, place
it on a soft, non-abrasive surface, such as carpet or cardboard.
TOOLS REQUIRED (NOT INCLUDED)
HARDWARE INCLUDED
Assembly lnstructions
Assembly of this fixture will be accomplished by first determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling and then installing the fixture.
Safety Warning
Read wiring and grounding instruction and any additional directions. Turn
power supply off during installation. If new wiring is required, consult a
qualified electrician or local authorities for code requirements.
Warranty
ONE (1) YEAR WARRANTY
-
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. The warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer`s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. -
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>