iFORY TST001 LeapBuds E True Wireless Earbuds User Manual

June 3, 2024
ifory

iFORY TST001 LeapBuds E True Wireless Earbuds User ManualiFORY TST001
LeapBuds E True Wireless Earbuds

Product List

  • TWS Earbuds xl
  • Charging cable xl
  • Instruction Manual xl

Product Introduction

First Use

  1. Open the charging case,take out the earbuds and remove the sticker.Then touch the left or right earbuds for 2s to turn it on. Or put back the earbuds into the charging case and then take out, the automatic power on. The earbuds LED indicator will flash blue light 2 times and enter the automatically pairing state.

  2. When the red and blue indicator of one earbud flash alternately and the indicator of the other earbud is off, the earbuds is paired successfully.

  3. Activate Bluetooth function in your device and search the pairing name “Leapbuds E” to connect.

  4. When the earbuds indicator is off and and the headset voice prompts “connected”, the earbuds is successfully paired with the mobile phone. Ready to use.

Daily use

Take out the earbuds and it will connect automatically to your device.

General Function

Power On/Off
Power on: Take out the earbuds or long press the left or right earphone touch area for 2 seconds, the voice prompt “power on”. If the device has a connection record, it will connect automatically to your device and the voice prompt connected”. Power off: Put back the earbucls into charging case or long press the left or right earphone touch area for 5 seconds, the voice prompt ‘power off”.

Pairing & Connection
Pairing Mode: When the earbuds are paired, it will enter the pairing mode automatically, the red and blue indicator of one earbud flash alternately and the indicator of the other earbud is off.
Connection: Activate Bluetooth function in your device and search the pairing name “Leapbuds E” to connect. If the device has a connection record, wait few seconds and it will automatically connect with the device. After connected devict successfully, the earbuds LED indicator will turn off.

Answer/Reject calls
Answer tne phone: In the incoming call status, one-click the left or right earbud to answer the call.

Reject call:
In the incoming call status, long press the left or right earbud for 2s to reject the call, and double-click to hang up.

Next Song
in music playing status, triple click the right earbud to switch to the next song.

Previous song
In music playing status, triple click the left earbud to switch tc the previous song.

Activate Voice Assistant
When earbuds connected with phone, touch the left earbud for 2s and it will prompt a “beep” , then release to access the voice assistant.

Activate Game Mode
When earbuds connected with phone, touch the right earbud for 2s and it will prompt “game mode” .

Mic Switch
In the call state, if one earbud powers off and it will automatically switch the microphone of the other earbud.

Battery Low
When the power is less than 10%, you can hear the prompt “battery lows. Please charge in time.

Remove Device Records
In the Power-on state, click both earbuds for 8 times and it will clear all device records.

Auto-Pairing Mode
After remove device records, the earbuds will enter auto-pairing mode when the power on, both earbuds LED flicker red and blue lights at the same time. After paired each other, one earbud LED flicker red and blue light, the other LED light will be off.

Charge

Technical Specifications

EARBUDS

BT Version V5.3
Supported Protocols A20P/AVRCP/HIO/HFP
BT Range 10 Meters
Playing Time 4.5 Hours
Standby Time 120 Hours
Charging Time 1 Hour
Battery Type Polymer lithium battery 3.7V/30mAh
Frequency Response 20Hz-20kHz
Distortion <5% ( 50Hz-10KHz 1mW)

Charging case

Charging Cycles 3.5 Times
Charging Time 2 HOurS
Battery Type Polymer lithium battery 3.7V/400mAh

Q&A

Q1: What if one of earbuds is no sound?
A: Please turn off both earbuds or remove all device records, then reconnect your device.

Q2: How can I use a single earbud alone?
A: Please put back the one into charging case or power off, another one will work independently.

Q3: Why the earbuds sound suddenly get distorted?
A: Bluetooth signal is vulnerable to electromagnetic interference in airport, railway, subway etc.

Warranty Service

  1. our warranty period is 18 months from the date of purchase.
  2. During the warranty period, if there is a performance failure of this product, customer can send the product back to the company together with the warranty certificate.
  3. Repairs caused by improper use during the warranty period wilt be charged an appropriate fee.
  4. Product damage caused by unauthorized maintenance, man-made collision, abuse and unauthorized modification will not be covered by warranty service.
  5. Products beyond the warranty period specified by the company will not enjoy warranty service.

Order No.:| |
---|---|---
Return & Exchange:| Return| Exchange
Reason| |
Member Name:| |
Contact:| |

If you need to return or exchange the product, please contact the after-sales customer service first. After communication, Please fill in this form in detail and send it back with the product.
Return address: No.6 floor, Hainabaichuan Building, Baoan District, Shenzhen City, Guangdong Province, China Manufacturer: G-Youth TECHNOLOGIES (Shenzhen) CO LTD
TEL number: +86 166 2070 6268

FCC ID: 2A7117-GY1025

FCC Warning

This device complies with part 1S of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including.

Interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/Tv technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals