ORNO OR-AE-13110GS Desktop Extension Socket Instruction Manual
- June 4, 2024
- ORNO
Table of Contents
ORNO OR-AE-13110GS Desktop Extension Socket
Operating Instruction
Each household is a user of electrical and electronic equipment, and hence a potential producer of hazardous waste for humans and the environment, due to the presence of hazardous substances, mixtures and components in the equipment. On the other hand, used equipment is valuable material from which we can recover raw materials such as copper, tin, glass, iron and others. Theweee sign placed on the equipment, packaging or documents attached to it indicates the need for selective collection of waste electrical and electronic equipment. Products so marked, under penalty of fine, cannot be thrown into ordinary garbage along with other waste. -The marking means at the same time that the equipment was placed on the market after August 13, 2005. It is the responsibility of the user to hand the used equipment to a designated collection point for proper processing. Used equipment can also be handed over to the seller, if one buys a new product in an amount not greater than the new purchased equipment of the same type. Information on the available collection system of waste electrical equipment can be found in the information desk of the store and in the municipal office or district office. Proper handling of used equipment prevents negative consequences for t he environment and human health!
DIMENSIONS
Before using the device, read this Operating Manual and keep it for future
use. If you have any problems with understanding its contents, please contact
the seller.
The manufacturer is not responsible for any damage that can result from
improper device installation or operation. Any repair or modification carried
out by yourselves results in loss of guarantee.
In view of the fact that the technical data are subject to continuous
modifications, the manufacturer reserves a right to make changes to the
product characteristics and to introduce different constructional solutions
without deterioration of the product parameters or functional quality.
Additional information about ORNO products are available at
www.orno.pl. Orno-Logistic Sp. z o.0. holds no
responsibility for the results of non-compliance with the provisions of the
present Manual. Orno Logistic Sp. z o.o. reserves the right to make changes to
the Manual the latest version of the Manual can be downloaded from
support.orno.pl. Any translation/interpretation rights and copyright in
relation to this Manual are reserved.
- Disconnect power supply before any activities on the product.
- Donot immerse the device in water or other fluids.
- Do not operate the device when its housing or wire is damaged.
- Do not open the device and do not repair it by yourselves.
- Donot use the device contrary to its original purpose.
- Suitable for indoor use only.
- Keep out of reach of children.
- Avoid contact with water and other electric conductors (e-g.metals).
Before connecting the plug to the mains socket, make sure that the network parameters comply with the technical data. In the event of damage to the cable, immediately disconnect it from the power outlet in a manner that is safe for the user. Do not use the device with a damaged cable. The damaged cable must be replaced.
INSTALLATION
- Before installing the device, drill a hole in the surface of a table or a desk.
- Put the socket and its wires inside the prepared opening.
- Use the screws, included to the set, and secure the socket from underneath the desktop.
TECHNICAL DATA
- material: plastic aluminium
- power supply: 230V-, 50 Hz
- current: max. 16A
- socket type: French (E type) lub Schuko (F type)
- number of sockets: 3
- HDMI socket: 1
- HDMI socket standard: 2.0
- RJ45 socket: 2
- protection level: IP 20
- max. load: 3680W
- cable type: 3×1.5mm
- cable length: 1.5 m
- edge size:2 mm
- net weight: 1.86 kg