KICHLER 37508A 4-Light Vanity Instruction Manual

: June 12, 2024
: KICHLER

Table of Contents

KICHLER 37508A 4-Light Vanity
Product Information
Product Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KICHLER 37508A 4-Light Vanity

Product Information

Product Name:

4-Light Vanity

Model Number:

37378A, 37508A

Item Number:

0616049, 2582018

Package Contents:

A – Canopy (Quantity: 1)
B – Mounting Bracket (Quantity: 1)
C – Socket (Quantity: 4)

Hardware Contents:

AA – Wire Connector (Quantity: 3)
BB – Threaded Short Knob (Quantity: 2)
CC – Machine Screw Long (Quantity: 2)
DD – Machine Screw Short (Quantity: 2)

Safety Information:

Please read and understand this entire manual before attempting to assemble, operate, or install the product. This product contains chemicals, including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit http://www.P65Warnings.ca.gov. Do not leave out any parts or use any worn out or broken parts, as it may invalidate the ETL listing and/or C.S.A. certification of the fixture.

Product Usage Instructions

Preparation:

Before beginning assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time:

30 minutes to 1 hour

Tools Required for Assembly (not included):

Phillips screwdriver
Flathead screwdriver
Wire strippers
Electrical tape
Ladder
Safety glasses

Assembly Instructions:

Orient the mounting bracket (B) so the raised center portion protrudes into the outlet box. Insert long machine screws (DD) through the mounting bracket (B). With long machine screws (DD) protruding outward, connect the mounting bracket (B) to the outlet box (not included) with short machine screws (BB).

Hardware Used:

BB – Short Machine Screw (Quantity: 2)
DD – Long Machine Screw (Quantity: 2)
Connect the supply wires to the fixture wires using wire connectors (AA). Match the bare copper or green ground supply wire with the bare copper or green ground fixture wire. Match the black supply wire with the black fixture wire. Match the white supply wire with the white fixture wire.

Hardware Used:

AA – Wire Connector (Quantity: 3)
Pass the canopy (A) over the long machine screws (DD) protruding from the mounting bracket (B) and secure it in place with threaded knobs (CC).

Hardware Used:

CC – Threaded Knobs (Quantity: 2)

Insert a 60-watt max. medium base bulb or LED equivalent (not included) into each socket (C).

Care and Maintenance:

To clean the fixture, wipe it with a soft damp cloth. Do not use abrasive cleaners or solvents. Do not wash the shades in an automatic dishwasher.

Troubleshooting:

Problem	Possible Cause	Action
Fixture does not light.	1. Fixture may be wired incorrectly.
2. Worn or broken bulb.	1. Check wiring.

2. Replace bulb.

Revision Date: 27-Jul-2022

Distributed by: Kichler Lighting LLC

30455 Solon Rd Solon, OH 44139

Printed in: India

PART	DESCRIPTION	QUANTITY
A	Canopy	1
B	Mounting Bracket	1
C	Socket	4

HARDWARE CONTENTS

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING
CAUTION – RISK OF SHOCK –Disconnect Power at the main circuit breaker panel or main fusebox before starting and during the installation.
WARNING:
This fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. If you are not familiar with code requirements, installation by a certified electrician is recommended.
Do not use bulbs with wattage greater than specified on this fixture.
California Proposition 65 WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, go to http://www.P65Warnings.ca.gov

WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to http://www.P65Warnings.ca.gov

If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate completely, please contact a licensed electrical contractor.
All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate ETL listing and/or C.S.A. certification of this fixture.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated assembly time
30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses.

ASSEMBLY INSTRUCTIONS

Orient the mounting bracket (B) so the raised center portion protrudes into the outlet box. Insert long machine screws (DD) through mounting bracket (B). With long machine screws (DD) protruding outward, connect the mounting bracket (B) to the outlet box (not included) with short machine screws (BB).
Hardware Used
Wire connection guide:

Ground wire
For installation in the United States:
Wrap ground wire from outlet box around ground screw on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA).
For installation in Canada:
If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw. Connect fixture ground wire to outlet ground wire with the wire connector (AA).

Supply wires

Connect the Neutral (White) supply wire from the outlet box to the Neutral fixture wire (White or Parallel Cord “D” shaped and ribbed).
Connect the Hot (Black) supply wire from the outlet box to the Hot fixture wire (Black or Parallel Cord round and smooth).

NOTE

Fixture wires will either be:

Black and White.
Parallel Cord SPT-1 lamp wire with one round smooth wire and one “D” shapedribbed wire.

Hardware Used

KICHLER-37508A-4-Light-Vanity-04

ASSEMBLY INSTRUCTIONS
Pass canopy (A) over the long machine screws (DD) protruding from the mounting bracket (B) and secure in place with threaded knobs (CC).

Hardware Used

Insert 60-watt max. medium base bulb or LED equivalent (not included) into socket (C). Repeat for remaining sockets. CARE AND MAINTENANCE

Always be certain that electric current is turned off before cleaning this item.
Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish.
All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.

TROUBLESHOOTING