tp-link C410 KIT Solar Powered Security Camera Kit User Guide

: September 11, 2024
: tp-link

Table of Contents

C410 KIT Solar Powered Security Camera Kit
Product Information
Specifications
Product Usage Instructions
1. Charge the Battery
2. Set Up Your Camera
3. Camera Appearance and Functions
4. Introduction
- Frequently Asked Questions (FAQ)
What is Amazon Frustration-Free Setup?

C410 KIT Solar Powered Security Camera Kit

Product Information

Specifications

Solar-Powered Security Camera Kit
Flexible installation options
Continuous solar power
180-day battery life based on Tapo laboratory tests
MicroSD card storage (microSD card must be purchased
separately)
USB Type-C Charging Port

Product Usage Instructions

1. Charge the Battery

The battery comes partially charged. It is recommended to fully
charge the battery before use, which takes about seven and a half
hours using a 5V 1A USB charger.

2. Set Up Your Camera

Step 1: Download the Tapo App from the App
Store or Google Play or by scanning the provided QR code.
Step 2: Open the app, log in with your TP-Link
ID, or create an account if you don’t have one.
Step 3: Add your camera by tapping the button
in the app, selecting your model, and following the app
instructions to complete the setup.

3. Camera Appearance and Functions

The camera features spotlights, a light sensor, motion sensor,
microphone, lens, status LED, speaker, microSD card slot, reset
button, power button, and USB Type-C charging port. The camera
status LED indicates various states with different colors and
patterns.

4. Introduction

The Tapo Solar-Powered Security Camera Kit offers advanced
security with flexible installation options. It can be set up as a
unified unit or individually linked by a cable. Enjoy wire-free
surveillance powered by solar energy.

Frequently Asked Questions (FAQ)

What is Amazon Frustration-Free Setup?

Amazon Frustration-Free Setup is a feature available for
specific models like Tapo C410 KIT that simplifies the setup
process for users. It may not be supported on all models like TC82
KIT.

User Guide
Solar-Powered Security Camera Kit

Contents
About This Guide ··········································································· 1 Introduction ······················································································ 2 Charge the Battery········································································ 5 Set Up Your Camera····································································· 6 Set Up Using Amazon Frustration-Free Setup·············· 7 Mounting Tips – Camera························································· 11 Mounting Tips – Solar Panel·················································· 12 Mount Solar Panel and Camera KIT·································· 13 Mount Your Camera Only ······················································· 15 Authentication·············································································· 16

About This Guide

This guide provides a brief introduction to the Solar-Powered Security Camera Kit and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reect your actual Tapo Camera experience.

Conventions
In this guide, the following convention is used:

Convention Description

Blue

Key information appears in blue, including management page text such as menus, items, buttons and so on.

Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.

Note:

Ignoring this type of note might result in a malfunction or damage to the device.

More Info
· Specications can be ound on the product page at https://www.tapo.com. · Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. · For camera setup and mounting videos, please refer to https://www.tp-link.com/support/setup-video/#cloud-cameras.

1

Introduction
Experience advanced security with the Tapo Solar-Powered Security Camera Kit, a solar-powered solution providing exible installation options. Its innovative solar panel design allows or versatile setup–either as a unied, sleek unit or individually, linked by a 4-meter cable. Enjoy wire-ree surveillance anywhere, thanks to continuous solar power.

· Wire-Free Design – Enjoy unparalleled security with the reedom to monitor your space rom any location without the limitations o outlets.
· High-Efciency Solar Charging – Daily 45 minutes* of direct sunlight charges the Tapo camera for all-day use. No sun? No problem–the built-in battery provides power for up to 180 days.
· 2K 3MP Live View – Captures more details and delivers high-denition pictures with a 2304×1296 px resolution.
· Color Night Vision – Enhances your security by revealing vivid colors with built-in spotlights.
· Smart Person Detection – Get alerts when a person is detected, reducing alse alerts and unnecessary notications, which also extends battery lie.
· Two-Way Audio – Enables direct communication through a built-in microphone and speaker.
· Customizable Sound and Audio Alarm – Customize your alarm by recording your own audio and adjusting the brightness o the dual spotlights to suit your preferences.
· Local and Cloud Storage – Save recorded video on a microSD card (up to 512 GB), no subscription required. Cloud storage§ is also supported for exibility.
· IP65 Weatherproof – Performs well even in harsh environments with rain and dust, ideal for indoor/outdoor scenarios.

*45 min o sunlight is based on standard environmental conditions (1000W/m2, 25°C, AM1.5) and specied working scenes (up to 100 events triggered per day). Actual required time o sunlight may vary.

180-day battery lie is based on Tapo laboratory tests with 250s o use per day. The time o use includes recording and watching live views. Actual battery lie may vary due to device settings, usage, router specications, and

environmental factors.

microSD card must be purchased separately. Actual storage capacity depends on the size of the microSD card used.

§Subscribe for cloud storage at https://www.tapo.com/tapocare/

2

Appearance

Front

Side

5 6

12

3

4

1

1 Spotlights 2 Light Sensor 3 Motion Sensor

4 Microphone 5 Lens 6 Status LED

Speaker

Back

1

11

microSD

Power Button
Press and hold for about 3 seconds to turn on/of the camera.
microSD Card Slot

1 Reset Button
Use a pin to press and hold for at least 5 seconds to reset the camera to factory default settings.
11 USB Type-C Charging Port

3

Camera Status LED Indication

Blinking amber uickly for 3 seconds Solid red Blinking red and green Blinking red slowly Solid amber Solid green Blinking red uickly Blinking green uickly

Plugging in USB charger Starting up Ready for setup Connecting to Wi-Fi Connected to Wi-Fi Connected to the cloud Camera resetting Camera updating

4

Charge the Battery
The battery comes partially charged. We recommend that you fully charge the battery before use. This will take about seven and a half hours.
5V 1A USB Charger
Note: 1. Peel o lm rom the camera beore use. 2. Warning: Do not tear o the silicone part by orce as it may aect the waterproo perormance. 3. Charge the battery using the USB cable included in the package. Inappropriate cables may result in slow charging or failure to charge. 4. When you plug in the USB charger, the LED should blink amber quickly for 3 seconds. If not, make sure the power is running and check your connection. 5. The camera may not power up after falling. Plug in the USB charger to power it on again. 6. Keep the ports rmly covered when not in use to ensure waterproo perormance. 7. Check the battery status on the Tapo app after setup.
5

Set Up Your Camera
Follow the steps below to set up your camera. For the setup video, please refer to https://www.tp-link.com/support/setup-video/#cloud-cameras.

Step 1. Download Tapo App
Get the Tapo app from the App Store or Google Play, or by scanning the QR code below.

Step 2. Log In
Open the app, and log in with your TP-Link ID. I you don’t have an account, create one rst.

Step 3. Add Your Camera
Tap the button in the app and select your model. Follow app instructions to complete the setup.

OR

6

Set Up Using Amazon Frustration-Free Setup

Note: Amazon Frustration-Free Setup is only available for Tapo C410 KIT. TC82 KIT doesn’t support Amazon Frustration-Free Setup.
What is Amazon Frustration-Free Setup?
Amazon Frustration-Free Setup can help connect and set up Tapo smart devices in fewer steps, without having to remember and re-enter your Wi-Fi password on each device. To use this eature, conrm the ollowing: The new Tapo device supports Amazon FFS. The new Tapo device is purchased rom Amazon. You have an Amazon FFS enabled Alexa device or router. You have saved your Wi-Fi inormation to Amazon by using Alexa echo. Your Tapo device and router are on the same network as your Alexa echo.

LED Indications during Amazon Frustration-Free Setup

LED Blinking red and green Blinking amber Solid green

Status Ready for setup FFS setup in progress Working properly

If the LED does not turn solid green after a long time, you can try to add the Tapo device manually. (Press the Reset button on your Tapo device once. Then open the Tapo app, tap the + button on the page, select your device model, and follow the app instructions. )

7

How to use Amazon Frustration-Free Setup with Tapo devices

1. Open the Amazon Alexa app. Then tap More and select Skills & Games.

2. Enter Tapo in the search bar and choose Tapo.

8

3. Tap the ENABLE TO USE button.

4. Log in with your TP-Link ID that has bound to your Tapo device, and tap Authorize. After authorized successfully, the message Tapo has been successfully linked will come up.

9

5. Plug in your Tapo device and the setup will complete automatically in two minutes. For setting up more Tapo devices, just plug in and enjoy! Done! If this device displays on the Home page in the Tapo app, it indicates this device has been successfully associated with your Amazon account and joined your Wi-Fi network automatically. If this device does not display on the Home page in the Tapo app, try setting it up manually. (Tap the + button on the page, select your device model, and then follow the app instructions.)
10

Mounting Tips – Camera
Read mounting tips before you mount the camera. 1. Avoid placing behind glass. Glass will obstruct the motion sensor of your camera. 2. Choose a proper location to mount your camera, or it will be triggered too often by false alarms. · Avoid pointing the camera directly at swaying trees. · Avoid pointing the camera directly at vehicles and pedestrians on the road. · Avoid pointing the camera directly at street lamps and sunlight. 3. Mount your camera to the side so that movement goes across the len’s eld o view to better trigger motion detection and AI detection.
*Do not mount facing the direction of movement.
4. Tilt the camera downwards at an angle of about 20°. 20°
5. Do not place the camera upside down. 6. Keep the motion sensor level for best results.
11

Mounting Tips – Solar Panel
Read mounting tips before you mount the solar panel. The solar panel captures free, clean solar energy and provides non-stop power supply for your Tapo cameras. The position and tilt angle of the solar panel greatly aects the solar efciency. 1. Choose a location where the solar panel gets the most sunlight throughout the year. 2. Position the panel south-facing in the Northern Hemisphere or north-facing in the Southern Hemisphere. The recommended tilt angle between the panel and the horizontal ground is 35° ~ 45°. 3. Regularly wipe the panel to remove dust and debris.
35°-45°
12

Mount Solar Panel and Camera KIT
The Tapo Solar Panel charges your Smart Wire-Free Indoor/Outdoor Security Camera continuously. For the setup video, please refer to https://www.tp- link.com/support/setup-video/#cloud-cameras

Wall Anchors ×3 + Self-tapping Screws ×3

Screw Caps ×2

1. Drill Holes
Stick the mounting template to a solid and level wall surface. Drill three screw holes according to the template.

2. Mount Bracket
Insert three wall anchors into the holes and use the mounting screws to affix the solar panel bracket over the anchors. Then, insert two screw caps into the upper screw holes.

3. Install the Solar Panel
Slide the solar panel onto the mounting bracket until it clicks into place.

=6 mm (15/64 in.)

13

4. Adjust Solar Panel Angle
Loosen the adjustable screw, tilt the solar panel to adjust the angle, and then tighten the adjustable screw.
The recommended tilt angle between the panel and the horizontal ground is 35° ~ 45°.

5. Install Camera & Adjust Angle
Install the camera onto the bracket and adjust the camera angle as per the camera’s guide.

6. Connect to the Camera
Insert the waterproof gasket into the camera’s charging port. Ensure that the gasket is tightly sealed. Then, connect the solar panel to the camera.

35°-45°

Camerasuggested
Angle

Ensure the camera is securely attached to the camera bracket by tightening the bottom screw.

For detailed connection instructions, please refer to https://www.tp- link.com/support/ faq/3800/

14

Mount Your Camera Only
To mount the camera individually, you can detach the camera bracket from the solar panel bracket and mount it to anywhere you want. For the setup video, please refer to https://www.tp-link.com/support/setup-video/#cloud-cameras.

1. Drill Holes
Stick the mounting template to the desired mounting place. Drill 3 holes according to the template.
=6 mm (15/64 in.)

2. Install the Bracket
Insert three anchors into the holes and use the screws to afx the bracket over the anchors.

3. Install the Camera
Install the camera on the mounting bracket, and adjust the camera angle.

15

Authentication
FCC compliance information statement
Product Name: Solar-Powered Security Camera Kit Model Number: Tapo C410 KIT/TC82 KIT Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
16

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024-03-08
17

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
2412MHz–2472MHz (20dBm)
EU Declaration of Conformity
For Solar Panel: TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/ For Camera: TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.
UKCA Mark
UK Declaration of Conformity
18

For Solar Panel: TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/ For Camera: TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’utilisateurde l’appareildoit accepter toutbrouillage radioélectriquesubi,memesile brouillage estsusceptibled’en compromettrelefonctionnement
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B) 19

Korea Warning Statements:
.

NCC Notice & BSMI Notice

· · · · · · · 40

Smart Wire-Free Security Camera Equipment name

Tapo C410 KIT/TC82 KIT Type designation (Type)

20

Unit
PCB

Lead (Pb)

Restricted substances and its chemical symbols

Mercury
(Hg)

Cadmium
(Cd)

Hexavalent chromium (Cr+6)

Polybrominated biphenyls
(PBB)

Polybrominated diphenyl ethers
(PBDE)

–

1. 0.1 wt % 0.01 wt %
Note 1″Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
2.
Note 2″” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
3.-

Note 3The “-” indicates that the restricted substance corresponds to the exemption.

, .

21

Safety Information
· Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended. · Do not use the device where wireless devices are not allowed. · Adapter shall be easily accessible. · Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t
hesitate to contact us. · Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid. · Do not disassemble, repair or modify the product. · Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to
malfunction resulting in an accident. · Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress. · Do not use liquid to clean the product. Only use a dry cloth. · Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician. · This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers
or hearing aids to determine if they are adequality shielded from external RF (radio frequency) energy. · Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF
energy. · Do not place heavy objects on top of the product. · When you leave the product unused for a long time unplug the product from the power outlet. · This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices. · Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F) · When mounting the camera with the magnetic base, we recommend installing it no higher than 2 meters. · Adapter should be used indoors where the ambient temperatureis lower than or equal to 40°C.
22

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
23

Explanation of the symbols on the product label
Note: Symbols may vary from products. Symbol Class II equipment Class II equipment with functional earthing Alternating current DC voltage Polarity of output terminals Indoor use only Dangerous voltage Caution, risk of electric shock Energy efficiency Marking Protective earth
Earth

Explanation

Frame or chassis 24

Symbol

Functional earthing

Explanation

Caution, hot surface Caution Operator’s manual

Stand-by

“ON”/”OFF” (push-push)
Fuse
Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods

Disconnection, all power plugs 25

Symbol m µ

Explanation Switch of mini-gap construction Switch of micro-gap construction (for US version) Switch of micro-gap / micro-disconnection construction (for other versions except US)
Switch without contact gap (Semiconductor switching device)

26