ever SOLO ES 9083Pro High Resolution DAC User Manual

PRODUCT MANUAL
High Resolution DAC

Eversolo Audio Technology Co.,Ltd

Introduction

Thank you for choosing EVERSOLO DAC-Z8.
DAC-Z8 is an all-in-one DAC, fully balanced preamp and headphone amplifier.
With the integration of XMOS 316 and ESS flagship ES9038 Pro DAC chip, DAC-Z8 is capable of decoding up to DSD512, PCM 768Khz@32Bit and MQA and ensuring D/ A conversion with low noise and distortion.
DAC-Z8 analog circuit has imported the multi-channel shunt compensation technology. 8 OPA1612 correspond to 8-channel output for I/V signal conversion, then output to 2 channels in parallel. In addition to high- precision resistances and fully balanced circuit design, it helps amplifying XLR, RCA and headphone output signal lossless, improving channel separation, dynamic range and the sound integrity.
There are diverse inputs for hi-res digital audio decoding for DAC-Z8. USB DAC input can be connected with computer and streamer; Type-C is to connect mobile devices like mobile phones or tablets; Optical and coaxial are to connect streamers and CD players. DAC-Z8 can also connect mobile devices by Bluetooth, just like a a Bluetooth decoder, it is BT5.0 and supports APTX HD, LDAC. The professional headphone driver circuit in DAC-Z8 has excellent audio indicators and strong driving force, which means DAC-Z8 can be used as a high-performance headphone amplifier and drive 16-3000hm HiFi headphones, with both high and low gain output options. EVER SOLO DAC-Z8 is the perfect partner for high- fidelity audio equipment or high-end headphones. The exceptional preamp performance, good sound quality and strong headphone driving force will bring you with authentic HiFi music experience.
Please read this manual before using the device so that you could use all features correctly.

Specification

Bluetooth Audio
Input| Qualcomm QCCS125 Bluetooth module, BT5.0
Support SBC/AAC/aptX/aptX LL/aptX HD/LDAC Bluetooth protocol
USB-B DAC Input| Compatible with Windows (7, 10), Mac, Android and IOS
Up to stereo DSD512, PCM 768KHz 32Bit and MQA
USB-C DAC Input| Compatible with Windows (7, 10), Mac, Android and 105
Up to stereo DSD512, PCM 768KHz 32Bit, MQA
Optical Audio Input| Up to stereo PCM 192KHz 32Bit, DSD64 Dop and MQA
Coaxial Audio Input| Up to stereo PCM 192KHz 32Bit, DSD64 Dop and MQA
Analog Audio
Output| Preamp output: XLR (balanced), RCA;
Headphone amp output: 6.35mm single-ended
USB Port| USB2.01 (only for firmware upgrade)
Control Methods| Remote control, mobile APP control and knob control
Recommended
Headphone Impedance| 16-3000 (low gain mode:16-320/high gain mode: 32-3000)
Rated Power| 9W
Dimensions| 270mm(W) 187mm(D) 50mm(H)
Packing List| Remote controrl, power cableal, USB cable1, product manual*1
Analog Audio
Characteristics| XLR Audio Output
Output level(Vrms): 4.1Vrms@O0dBFS
THD+N@A-wt: 0.000062%@I1kHz (-124dB@1kHz)
THD+N@No-wt: 0.000069%@1kHz (-123dB@1kHz)
Noise@No-wt: <1.2uVrms
SNR @No-wt: 133dB@1kHz
Frequency response: 20Hz-20kHz(+0.1dB)
Crosstalk: -130dB@1kHz
DNR @No-wt: 133dB@1kHz
RCA Audio Output
Output level (Vrms): 2.3Vrms@0dBFS
THD+N@A-wt: 0.000086%@1kHz(-121dB@1kHz)
THD+)@No-wt: 0.000097%@1kHz(-120dB@1kHz)
Noise @No-wt: <1.5uVrms
SNR @No-wt: 126dB@1kHz
Frequency response: 20Hz-20kHz(+0.1dB)
Crosstalk: -123dB@1kHz
DNR@No-wt: 126dB@1kHz
Headphone
Low gain mode
Output level(Vrms): 1.2Vrms@OdBFS
Maximum undistorted power: 45 mW@320
THD+N@A-wt: 0.00015%@1kHz(-116dB@1kHz)
THD+N@No-wt: 0.00018%@1kHz(-115dB@1kHZz)
Noise @No-wt: <2uVrms
SNR@No-wt: 124dB@1kHz
Frequency response: 20Hz-20kHz(+0.1dB)
DNR @No-wt: 119dB@1kHz
High gain mode
Output level(Vrms): 2.3Vrms@OdBFS
Maximum undistorted power: 17.6 mW@3000
THD+N@A-wt: 0.00016%@1kHz(-116dB@1kHz)
THD+N@No-wt: 0.00016%@1kHz(-116dB@1kHz)
Noise@No-wt: <2uvrms
SNR@No-wt: 124dB@1kHz
Frequency response): 20Hz-20kHz(+0.1dB)
DNR @No-wt: 124dB@1kHz

Hardware Introduction

Front panel

Control knob
Volume adjustment:
The knob can control volume when the device is in playback status. Rotate clockwise to increase volume while counterclockwise to decrease volume.
*Volume can be adjusted with step 0.5db~3db in DAC setting.

Setting menu:
Short press the knob will access into setting menu. Rotate left/right to navigate the menu upward/downward. Short press the knob again to confirm or access into the sub-menu.

Audio source selection:
Long press the knob to select audio source, rotate left/right to choose left/right audio source channels.

Rear panel

Output

1. Headphone output
   Connect a headphone with 6.35mm single-ended jack to DAC-Z8 headphone jack.
   Note: Select the suitable gain mode in DAC setting to adapt to headphones with different sensitivities and impedances.
   Headphone input has a higher priority than XLR/RCA, when it is in the mode of headphone output, the signal output of XLR/RCA will be disconnected.

2. RCA output
   Connect DAC-Z8 RCA output to power amplifier or active speaker RCA input by a RCA audio cable.

3. XLR balanced output
   Connect DAC-Z8 XLR output to power amplifier or active speaker XLR input by XLR audio cable.

*The positive and negative polarities are reversed for some audio systems, the default positive polarity of DAC-Z8 are shown below. If you need to reverse the polarity, please set it in the system: Settings > DAC audio > XLR Port Polarity >Reverse.

In order to reduce the possible signal interference of the RCA and XLR simultaneous output, XLR and RCA can be output separately by setting in the menu. Higher audio indicators and better sound quality can be obtained through separate output.

Input

4. Optical/Coaxial input
Connect this device with S/PDIF devices like media player and CD player by a Optical/Coaxial audio cable.
Please set the signal source to Optical/Coaxial.
5. USB DAC Input
Connect the computer to the USB DAC input of this device by USB-A to USB-B cable.
Computer is the digital audio source, this device is used as a computer sound card to decode audio signals.
Please select the signal source to “USB DAC IN’.
Notes:
Please refer to File Download part below to download Windows driver.
EVER SOLO DAC-Z8 is working as the audio output device when connecting with the computer, the settings are as follows.
Windows: Download and install the driver on the computer, find “Control Panel>Hardware and Sound >Sound >Playback’, then select “EVER SOLO DAC-Z8″.
Mac: No driver is needed to be installed, find “System Preferences

Sound>Output’, then select “EVER SOLO DAC-Z8”.
6. USB Type C input
Connect mobile phone or tablet to the USB-C port of this device by date cable, mobile device is used as a digital audio source to input into this device for audio decoding. Android devices use Type-C to Type-C cable, while |OS devices use Lightning to Type-C cable.
Please set the signal source to USB Type C IN’.
7. Bluetooth input
The device has a built-in Bluetooth receiver, with the support of Bluetooth audio protocol SBC/AAC/aptX/aptX LL/aptX HD/LDAC, it can connect with different mobile devices by
Bluetooth.
Please set the signal source to “Bluetooth IN’, enable Bluetooth on mobile device and search “EVER SOLO DAC-Z8” to finish Bluetooth pairing.

Remote control

Basic Settings

1. Signal source
   Long press then rotate the knob or press ‘ key on remote control to switch input source.

2. Settings
   Short press the knob or press key on remote control.

3. Output port
   Enter the setting menu > Output port > XLR output/ RCA output/ XLR and RCA output.

4. Headset gain
   Enter the setting menu > DAC > Headset gain, select high gain or low gain.

5. Volume control steps
   Enter the setting menu > DAC > Volume control steps, adjust the suitable volume step.
   “Power-on volume: is to select the volume when powering on, customize the volume or keep the last volume.

6. Filter
   Enter the setting menu > DAC > Filter, adjust DAC filtering characteristics for DSD or PCM to output different sound styles.

7. language
   Enter tne setting menu > General > Language, select language for menu and user interface.

8. VU meter
   Enter the setting menu > General > VU meter, select VU meter mode in for the playback interface according to your preferences.

9. Screen brightness
   Enter the setting menu > General > Screen brightness, select the brightness level of the display screen.

10. Knob
    Enter the setting menu > General > Knob, set up the brightness level of the ambient light and customize function for short pressing the knob(system menu or input source selection).

11. Firmware upgrade
    Download the firmware package on EVER SOLO official website to a U disk, connect the U disk to DAC-Z8 USB A port. Access system menu> About> Upgrade to upgrade firmware, wait for the device to restart automatically after upgrading the firmware successfully.
    Note: Don’t unplug the U disk or power the device off during the firmware upgrade period.

MQA (Master Quality Authenticated)
The DAC – Z8 includes MQA technology, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The DAC – Z8 LED glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.

MQA (Master Quality Authenticated)
MQA is an award-winning British technology that delivers the sound of the original master recording. The master MQA file is fully authenticated and is small enough to stream or download.
DAC-Z8 adopts MQA technology to receive and decode MQA audio and provide master-level sound.
Visit mga.co.uk for more information.
MQA and the Sound Wave Device are registered trade marks of MQA Limited © 2016

File Download

Download firmware, USB driver and controller app on the DOWNLOADS page of official website: www.eversolo.com
Or scan the QR codes below to download.
When downloading the driver, please unzip the package, double click .exe file and complete the installation via the instruction.

Driver/APP download
https://www.eversolo.com/Support/release_apk.html

Special note:
EVER SOLO will upgrade firmware from time to time in order to improve user experience, so that this manual might differ with the situation of real product. The functions or parameters of this device are subject to adjustment without prior notice.

For more information, please visit our official website: www.eversolo.com

Safety Warning

1. No water splashing or dripping, don’t put objects with liquids like vases on the device.
2. The socket should be put aside the device for easy operation and no occlusions.
3. Itis a Class | device,there must be grounding measures inside the box when using.

• Safe using below 2000m altitude.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>