AIRMAX TS94362 Spray Pattern Nozzle Instruction Manual
- June 4, 2024
- Airmax
Table of Contents
Spray Pattern Nozzle
INSTALLATION INSTRUCTIONS
For all PondSeries™ Fountains Systems
Installation Instructions
Warning: Always unplug the unit before any maintenance.
Step 1
Unscrew the nozzle nut and remove the currently installed spray pattern.
If you are running the classic pattern, no nozzle nut or spray pattern will be
installed.
Step 2
Prior to changing or installing nozzles, ensure that the Discharge Horn
O-Ring (#651311) is located in the
O-Ring groove.
Step 3 Optional
If your spray pattern requires a Flow Straightener it will be included with
the pattern.
The Flow Straightener simply drops into the top of the Discharge Horn and is
held in place by the nozzle and nozzle nut.
Step 4
Place the selected nozzle onto the Discharge Horn and tighten the nozzle nut.
Please Note: ONLY hand tightens the nozzle nut. Tools are not required for
this operation.
Step 5
Enjoy your newly installed PondSeries spray pattern!
NOTES __
THANK YOU FOR CHOOSING:
Airmax, Inc.
652124 V1.1
15425 Chets Way Street, Armada, MI 48005
866-424-7629
www.airmaxeco.com
contactus@airmaxeco.com