Airmax Fountain Spray Pattern Nozzle Instruction Manual

: June 12, 2024
: Airmax

Table of Contents

Airmax Fountain Spray Pattern Nozzle
Product Information
Product Usage Instructions
Installation Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Airmax Fountain Spray Pattern Nozzle

$Airmax-Fountain-Spray-Pattern-Nozzle-FIG- $2$$

Product Information

The product is a spray pattern nozzle for use with Airmax fountains. It is used to create different spray patterns in ponds and lakes. The nozzle comes with a nozzle nut and may require a flow straightener for certain spray patterns. The product is designed for easy installation and maintenance.

Product Usage Instructions

Step 1: To remove the currently installed spray pattern, unscrew the nozzle nut and remove the spray pattern.
Step 2: Before changing or installing nozzles, ensure that the Discharge Horn O-Ring (#651311) is located in the O-Ring groove.
Step 3: If your spray pattern does not require a flow straightener, place the selected nozzle onto the Discharge Horn and hand tighten the nozzle nut. No tools are required for this operation.
Step 4: If your spray pattern requires a flow straightener, it will be included with the pattern. For EcoSeries and PondSeries flow straighteners, simply drop it into the top of the Discharge Horn. Secure the flow straightener in place by placing the selected spray pattern nozzle onto the Discharge Horn and hand tighten the 4 nozzle nut. For LakeSeries flow straightener, insert it into the top of the Discharge Horn and secure it with the large 6 nozzle nut. Then, secure the spray pattern nozzle with 4 nozzle nut onto the flow straightener. No tools are required for this operation.
Step 5: Enjoy your newly installed spray pattern!

If you have any further questions or need assistance, please contact Airmax, Inc. at 866-424-7629 or email contactus@airmaxeco.com.
For all EcoSeries™, PondSeries®, and LakeSeries® Fountain Systems

Installation Instructions

Warning : Always unplug the unit before performing any maintenance.

Step 1
Unscrew the nozzle nut and remove the currently installed spray pattern.
If you are running the Classic pattern for PondSeries fountains, no nozzle nut or spray plate will be used
Step 2
Prior to changing or installing nozzles, ensure that the Discharge Horn
O-Ring (#651311) is located in the O-Ring groove.
Step 3
If your spray pattern requires a Flow Straightener, please skip to step 4.
Place the selected nozzle onto the Discharge Horn and tighten the nozzle nut.
Please Note: ONLY hand tighten the nozzle nut. Tools are not required for this operation.
Step 4
If your spray pattern requires a Flow Straightener, it will be included with the pattern
Spray patterns that require a Flow Straightener:
- Single Arch
- Double Arch
- Double Arch & Geyser
- Blossom (Crown & Arch)
  The EcoSeries and PondSeries Flow Straightener simply drops into the top of the Discharge Horn. Secure the Flow Straightener in place by placing the selected spray pattern nozzle onto the Discharge Horn and tightening the 4” nozzle nut.
  The LakeSeries Flow Straightener is also inserted into the top of the Discharge Horn and is held in place by the large 6” nozzle nut. The spray pattern nozzle with 4” nozzle nut can then be secured onto the Flow Straightener.
  Please Note: ONLY hand tighten the nozzle nut and nozzle. Tools are not required for this operation.
Step 5
Enjoy your newly installed spray pattern!