Monoprice 130919 Blackbird 4K 4×1 HDMI Switch User Manual
- June 12, 2024
- Monoprice
Table of Contents
Monoprice 130919 Blackbird 4K 4×1 HDMI Switch
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.
- This device is intended for indoor use only.
- Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately unplug it from the power outlet and allow it to fully dry before reapplying power.
- Do not expose this device to excessively high temperatures. Do not place it in, on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
- Do not place or install this device in an area where it can be exposed to excessive amounts of dust, humidity, oil, smoke, or combustible vapors.
- Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred.
- Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the device.
- Never unplug the unit by pulling on the power cord. Always grasp the connector head or adapter body.
- Ensure that power is turned off and disconnected before making any electrical connections.
- Take care to prevent damage to the power cord. Do not allow it to become crimped, pinched, walked on, or become tangled with other cords. Ensure that the power cord does not present a tripping hazard.
- Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
- This device has no user-serviceable parts. Do not attempt to open, service, or modify this device.
INTRODUCTION
This Blackbird™ 4K 4×1 HDMI® Switch allows you to connect up to four HDMI sources to a single display. It supports video resolutions up to 4K@60Hz YUV4:4:4, including 1080p@120Hz and 3D 1080p@60Hz. It complies with the HDMI 2.0b and HDCP 2.2 specifications and delivers up to 18 Gbps video bandwidth. It supports 10-bit High Dynamic Range (HDR) video and High Bit Rate (HBR) audio pass-through. It features a built-in retiming and cable driver and extracts 2-channel analog audio for use with powered speakers or an external amplifier or receiver.
FEATURES
- Supports resolutions up to 4K@60Hz YUV4:4:4, including 1080p@120Hz and 3D 1080p@60Hz
- Complies with the HDMI 2.0b and HDCP 2.2 specifications
- Delivers up to 18 Gbps video bandwidth
- Extracts 2-channel analog audio
- Built-in retiming and cable driver
- Supports 10-bit High Dynamic Range (HDR) video pass-through
- Supports High Bit Rate (HBR) audio pass-through
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5 am-7 pm PT, Sat-Sun: 9 am-6 pm PT) or via email at support@monoprice.com
PACKAGE CONTENTS **
**
Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.
- 1x Blackbird™ 4K 4×1 HDMI® Switch
- 1x IR Remote Control
- 1x AC Power Adapter (5 VDC, 1A)
- 1x User’s Manual
PRODUCT OVERVIEW
- IR Receiver Window: IR receiver for use with the included IR remote control.
- Input LEDs: The LED will illuminate when the corresponding HDMI® input is selected.
- Select Button: Press the Select button to cycle forward through the available HDMI inputs.
- DC 5V: DC barrel connector for connecting the included AC power adapter.
- HDMI Inputs: Four HDMI connectors for connecting up to four HDMI video source devices.
- Audio Out: 3.5mm analog stereo audio output for use with external speakers or to connect to an external amplifier or receiver.
- HDMI Output: HDMI connector for connecting an HDMI display.
SAMPLE CONNECTION DIAGRAM
INSTALLATION
Perform the following steps to install this switch to your home theater system.
- Ensure that all equipment to be connected is powered off and unplugged from its power source.
- Place or mount the switch in its intended location.
- Using a High-Speed HDMI® Cable (not included), plug one end into the HDMI input on your display, then plug the other end into the Output connector on the switch.
- Using a High-Speed HDMI Cable (not included), plug one end into one of the HDMI Input connectors on the switch, then plug the other end into the HDMI output on your video source device. Repeat for up to three additional video source devices.
- (Optional) Plug a pair of powered speakers into the Audio Out jack on the switch.
- Plug the DC barrel connector on the included AC power adapter into the DC 5V jack on the switch, then plug the adapter into a nearby AC power outlet.
- Plug in and power on all connected equipment. Start video playback on the video source devices, then either press the Select button or use the included remote control to switch to each video source to verify that you can see the video on the connected display.
Congratulations, your Blackbird™ HDMI® switch is successfully installed and ready for use!
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com during regular business hours, 7 days a week. You can also get assistance through email by sending a message to tech@monoprice.com
SPECIFICATIONS
| Model | 30919 |
|---|---|
| Inputs | 4x HDMI® |
| Outputs | 1x HDMI, 1x 3.5mm TRS stereo analog audio |
| Maximum Resolution | 4K@60Hz YUV4:4:4, 4K@30Hz, |
1080p@120Hz, 3D 1080p@60Hz
Video Bandwidth| 18 Gbps
HDMI Version| 2.0b
HDCP Version| 2.2 and 1.4
Color Depth| 10-bits and 12-bits per channel
Color Spaces| RGB, YCbCr 4:4:4, YCbCr 4:2:2
HDMI Audio Formats (pass-through)
| LPCM 2/5.1/7.1CH, Dolby® Digital™, DTS® 5.1, Dolby Digital Plus™, Dolby
TrueHD™, DTS- HD Master Audio™, Dolby Atmos™, DTS:X™
Input Power| 5 VDC, 1A
AC Adapter Input Power| 100 ~ 240 VAC, 50/60 Hz
Maximum Power Consumption| 1 watt
Operating Temperature| +32 ~ +104°F (0 ~ +40°C)
Storage Temperature| -4 ~ +140°F (-20 ~ +60°C)
Relative Humidity| 20 ~90% RH, non-condensing
Dimensions| 4.8″ x 3.1″ x 0.6″ (121 x 79 x 16 mm)
Weight| 6.9 oz. (195 g)
Certifications| CE, FCC, UL
- HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
- Blu-ray Disc™ and Blu-ray™ are trademarks of the Blu-ray Disc Association.
- Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby Digital Plus™, Dolby TrueHD™, and Dolby Atmos™ are trademarks of Dolby Laboratories.
- DTS® is a registered trademark and the DTS logos, Symbol, DTS-HD™, DTS: X™, and DTS-HD Master Audio™ are trademarks of DTS, Inc.
FREQUENTLY ASKED QUESTIONS
What is the Monoprice 130919 Blackbird 4K 4x1 HDMI Switch?
The Monoprice 130919 Blackbird is a 4K 4x1 HDMI switch, which allows you to connect up to four HDMI sources and switch between them to display on a single HDMI output.
What resolution does the Blackbird 4K HDMI switch support?
The Blackbird 4K HDMI switch supports resolutions up to 4K Ultra HD (3840x2160) at 60Hz.
How many HDMI inputs does the Blackbird 4K switch have?
The Blackbird 4K switch has four HDMI inputs, allowing you to connect up to four devices, such as gaming consoles, Blu-ray players, or streaming devices.
What is the purpose of an HDMI switch?
An HDMI switch allows you to connect multiple HDMI devices to a single HDMI port on a TV or monitor and switch between them without having to physically swap cables.
Does the Blackbird 4K HDMI switch support HDR (High Dynamic Range)?
Yes, the Blackbird 4K switch supports HDR content for a more vibrant and lifelike viewing experience.
How do you switch between different HDMI inputs on the Blackbird 4K switch?
The Blackbird 4K switch typically comes with a remote control or has a button on the device itself to toggle between the HDMI inputs.
Can the Blackbird 4K HDMI switch automatically detect the active HDMI input?
Yes, many HDMI switches, including the Blackbird 4K, have auto-switching capabilities that detect and display the active input automatically.
What audio formats does the Blackbird 4K switch support?
The Blackbird 4K switch supports various audio formats, including Dolby TrueHD, DTS-HD Master Audio, and LPCM 7.1.
Is the Blackbird 4K HDMI switch compatible with gaming consoles like PlayStation and Xbox?
Yes, the Blackbird 4K switch is compatible with gaming consoles, making it convenient to switch between gaming devices on a single display.
Can I use the Blackbird 4K HDMI switch with my home theater system?
Yes, the Blackbird 4K switch can be integrated into a home theater setup to switch between different HDMI sources like Blu-ray players and media players.
Does the Blackbird 4K HDMI switch require an external power source?
Yes, the Blackbird 4K switch typically requires an external power adapter to operate properly.
Is the Blackbird 4K HDMI switch HDCP (High-bandwidth Digital Content Protection) compliant?
Yes, the Blackbird 4K switch is HDCP compliant, ensuring it can handle protected content from devices like Blu-ray players and streaming services.
Can the Blackbird 4K HDMI switch be used with older HDMI devices that support lower resolutions?
Yes, the Blackbird 4K switch is backward compatible with older HDMI devices that support lower resolutions.
What is the maximum cable length supported by the Blackbird 4K HDMI switch?
The maximum cable length can vary based on the quality of HDMI cables used, but generally, it supports standard HDMI cable lengths (up to 15 meters).
Does the Blackbird 4K HDMI switch come with HDMI cables included?
The package contents may vary, but the Blackbird 4K switch typically does not come with HDMI cables included.
DOWNLOAD THE PDF LINK:Monoprice 130919 Blackbird 4K 4×1 HDMI Switch User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>