ONFORU G20UV UV LED Flood Light User Manual

June 12, 2024
ONFORU

ONFORU G20UV UV LED Flood Light

ONFORU-G20UV-UV-LED-Flood-Light-PRODUCT

UV LED FLOOD LIGHT

Product Manual

MODEL:

  • G20UV
  • D50UV
  • D100UV

COMPONENTS AND STRUCTURE

  • Cover
  • LED Light Source
  • Lamp Bracket

Specifications:

Model Power Consumption Beam Angle Dimensions Weight
G20UV 20W 385-400nm 1539128mm 0.41KG
D50UV 50W 385-400nm 25816840mm 0.95KG
D100UV 100W 385-400nm 32920835mm 1.55KG

Note:
The intended purpose of this special purpose product: This light is used to create atmosphere. It is not suitable for household room illumination. The light source is not intended for use in other applications.

PREPARATION

  • Flathead Screwdriver
  • Screwdriver
  • Electric Drill
  • Eye Protection
  • Pliers
  • Step Ladder

Manufacturer:

Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
Address: qian wan yi lu 1 hao A dong 201 shi qian hai shen gang he zuo qu Shen Zhen, Guang Dong, 518000, CN
Email: [email protected]
Website: www.onforuleds.com

EU Representative:

MDH LIGHTING LTD
Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia,Cyprus
Email: [email protected]

UK Representative:

MDH LIGHTING LTD
69 Aberdeen Avenue, Cambridge CB2 8DL, United Kingdom
Email: [email protected]

Made in China

Product Usage Instructions

Installation

  1. Choose a suitable location to install the UV LED Flood Light.
  2. Use the provided tools (Flathead Screwdriver, Screwdriver,Electric Drill, Pliers) to securely attach the Lamp Bracket to the desired surface.
  3. Connect the LED Light Source to the Lamp Bracket.
  4. Ensure proper eye protection when working with the UV LED Flood Light.
  5. Use a Step Ladder if necessary to reach the installation area.

Usage

  • Ensure that the UV LED Flood Light is connected to a suitable power source (220-240V, 50Hz).
  • Turn on the UV LED Flood Light using the designated power switch.
  • Adjust the beam angle if required for optimal coverage.
  • The UV LED Flood Light emits UV light at a wavelength of 385-400nm. Take necessary precautions to avoid direct exposure to the UV light.

Please refer to the product manual for further instructions and safety guidelines.

UV LED FLOOD LIGHT

MODEL:

  • G20UV
  • D50UV
  • D100UV

COMPONENTS AND STRUCTURE

ONFORU-G20UV-UV-LED-Flood-Light-2

  1. Cover
  2. LED Light Source
  3. Lamp Bracket

SPECIFICATIONS

UV LED FLOOD LIGHT

Model| G20UV| D50UV| D100UV
Input Voltage| ****

220-240V~ 50Hz

Input Current| ****

0.11A

| ****

0.22A

| ****

0.45A

Rated Power| ****

20W

| ****

50W

| ****

100W

Wavelength| ****

385-400nm

Chromaticity coordinate| ****

x=0.1763 y=0.0317

CRI / Farbwiedergabeindex| ****

-1.9

Power factor| ****

≥0.9

Beam Angle| ****

120°

IP Rating| ****

IP66

t a| ****

-20-40°C

DIMENSIONS

Model| G20UV| D50UV
DIMENSIONS| /| 1539128mm| 25816840mm
Weight| 0.41KG| 0.95KG
Max Projected Area| ****

0.0105 m²

| ****

0.0265 m²

Model| D100UV|
DIMENSIONS| 32920835mm|
Weight| 1.55KG|
Max Projected Area| 0.0616 m²|
Note
The intended purpose of this special purpose product: This light is used to create atmosphere. It is not suitable for household room illumination,the light source is not intended for use in other applications.|

PREPARATION

Check all components for damage, do not use the product if it is damaged.

ONFORU-G20UV-UV-LED-Flood-Light-7

SAFETY INFORMATION

Disconnect the power supply before attempting any work on the unit!
Installing these units involves work on the mains voltage supply; installation must therefore be carried out professionally In accordance with the appliance national wiring regulations And electrical operating conditions.
Be careful not to damage or cut the wire insulation (Covering) during installation. Do not let the wires touch any sharp edges.

INSTALLATION STEPS

  • Product appearance may vary from image shown
  • Recommended to be installed no higher than 5m

ONFORU-G20UV-UV-LED-Flood-Light-8

Step 1: According to the space (see the“A”part of the picture of two screw bits on the LED Light bracketdrill two mounting holes.

Step 2: Put the bracket onto the prepared mounting holes and then screw it on.

Step 3: Adjust the beam direction as you like,and then plug into the main socket.

Manufacturer / Hersteller:
Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
Address: qian wan yi lu 1 hao A dong 201 shi qian hai shen gang he zuo qu Shen Zhen, Guang
Dong, 518000, CN
[email protected] www.onforuleds.com

MDH LIGHTING LTD
Suite 302, 292 Strovolos Avenue, 2048 Strovolos
Nicosia, Cyprus | [email protected]

MDH LIGHTING LTD
69 Aberdeen Avenue, Cambridge CB2 8DL,
United Kingdom | [email protected]

Made in China

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ONFORU User Manuals

Related Manuals