ARCORA AR7102200RB Single-Handle Solid Brass High Arc Kitchen Faucet Installation Guide
- June 12, 2024
- ARCORA
Table of Contents
ARCORA AR7102200RB Single-Handle Solid Brass High Arc Kitchen Faucet
Product Information
This product is a faucet that is designed for easy installation and comes with a durable finish. It complies with California water efficiency regulations, California Proposition 65, and the Federal Safe Drinking Water Act. The faucet is suitable for use in areas with low water pressure and can be improved by replacing the aerator.
Product Usage Instructions
- Before beginning the installation, read all the instructions and warnings carefully.
- Clean the product regularly by wiping gently with a damp cloth and blotting dry with a soft towel. Avoid using harsh abrasives or polish that can damage the finish.
- If the water flow from the faucet is unsatisfactory due to low water pressure, replace the 2.2 gpm aerator with the 1.8 gpm aerator provided to improve water flow.
- Ensure that the water pipe is thoroughly cleaned before installing the valves to prevent dirt and deposits.
- Attach the flexible hoses under the faucet body.
- Fasten the thread pipe to the base of the faucet body by turning it clockwise.
- Attach the O-ring to the faucet body.
- Slide the tubes down through the mounting hole and place the faucet on the sink. If the sink is uneven, use silicone under the gasket.
- Slide the 9.6 decorated plate with gasket over the tubes and mounting stud, then slide them down through the mounting hole and place them on the sink.
- Tighten all connections and ensure there are no leaks. Do not overtighten.
- To flush water lines and remove any debris that could cause damage, turn the faucet handles to the full on mixed position, turn on the button, and turn on the hot and cold water supplies. Flush water lines for one minute.
- Check the aerator seal and reinstall if necessary.
- Verify all connections for leaks and retighten if needed.
- Use the triangle fastener when the thickness of the sink requires it.
Installation instructions
For easy installation of your faucet you will need:
- To READ ALL the instructions completely before beginning.
- To READ ALL warnings, care, and maintenance information.
Cleaning and Care
- Care should be given to the cleaning of this product. Although its finish is extremely durable,
- It can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
With 1.8 gpm are compliant with California water effi ciency regulations, Complies with California Proposition 65 and with the Federal Safe Drinking Water Act.
Before installing the valves, clean the water pipe thoroughly to avoid dirt and deposits.
INSTRUCTIONS
- Attach flexible hoses under the faucet body.
- Make sure fasten the thread pipe(3) to the base of the faucet body clock-wise.
-
Make sure attach the O-ring(2) to the faucet body.
-
Slide tubes down through mounting hole andfaucet on sink.
Option : If sink is uneven, use silicone under the gasket. -
Make sure attach the O-ring(2) to the faucet body.
-
Slide 9.6″ decorated plate with gasket(3) up over tubes and mounting stud.
Slide tubes down through mounting hole and faucet, 9.6″decorated plate with gasket on sink.
-
Use the triangle fastener(15) when the thickness of sink <5mm.
-
Place Triangle fastener（15） and washer(4) and metal plate(5) over mounting stud(3) under sink. Secure with mounting nut(6), tighten the screws(7) to fix the faucet body.
-
Attach supply hot(8)and cool lines(9) .
-
If the anglve is G1/2”, please use G3/8” standard pipe connection G1/2” adapter included (10) .
Do not overtighten. Turn water back on. -
turn faucet handles to the full on mixed position.
-
Turn on the button.
-
Turn on hot and cold water supplies and flush water lines for one minute. Important: This flushes away any debristhat could cause damage to internal parts.
Verify theseal is attached to aerator then reinstall.
Check all connections for leaks. Re-tighten if necessary, but do not overtighten.