VAXCEL T0660 Textured Lavage 7 Inch Tall Wall Sconce Installation Guide

VAXCEL T0660 Textured Lavage 7 Inch Tall Wall Sconce Installation Guide

WARNING: Turn off the main power at circuit breaker before installing fixture. AVERTISSEMENT:

NOTE:

1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

• Mounting Plate Unit (A)
  

• Mounting Screw (B)
  

• **Wire Connector (C)

**

• **Set screw (D)

**

ASSEMBLY

Installation Steps

Turn off the power at fuse or circuit box

1. Unscrew the two set screws (D) and remove the mounting plate unit (A) from the backplate.

2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B).
   Note: Make sure that two set holes are lined up horizontally to make the fixture level.

3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:

   • Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
   • Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
   • Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with the green ground screw， then depending on local code, connect it to the house ground wire with the wire connector (C).
     Carefully put all of the wires back into the outlet box.

4. Attach the backplate of the fixture to the mounting plate unit (A) by aligning holes, secure the two set screws (D) from the side hole of the backplate into the hole in the side of the mounting plate unit (A).
   Note: With silicone caulk compound, caulk completely around where the backplate meets with the wall surface to prevent water from seeping into the outlet box.

5. Install the bulb (not included). See relamping label at socket area or packaging for maximum wattage allowed.

Turn on the power at fuse or circuit box

The following parts are available for re-order if damaged or missing.

Spare Parts List:

• Mounting Plate Unit (A)
  

• Mounting Screw (B)
  

• **Wire Connector (C)

**

• **Set screw (D)

**

Assembly Kit 6594MM (1 SET)

Documents / Resources

| VAXCEL T0660 Textured Lavage 7 Inch Tall Wall Sconce [pdf] Installation Guide
T0660, T0660 Textured Lavage 7 Inch Tall Wall Sconce, Textured Lavage 7 Inch Tall Wall Sconce, Lavage 7 Inch Tall Wall Sconce, 7 Inch Tall Wall Sconce, Tall Wall Sconce, Wall Sconce, Sconce
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>