SKYDANCE TE-15A Triac Constant Current LED Driver Instruction Manual

SKYDANCE TE-15A Triac Constant Current LED Driver

Triac Constant Current LED Driver

• Dimming interface: Triac/ELV, AC Push-Dim

• Apply to leading edge/trailing edge Triac dimmers and dimming
  system

• PWM digital dimming, no alter LED color rendering index

• 1 channel constant current output, configurable current via DIP
  switch

• Over-heat / Over-load / Short circuit protection, recover
  automatically

• Full protective plastic case

• Suitable for indoor LED lighting application

• 5 Year, 50,000hr warranty

Mechanical Structures and Installations|

• AC N input
• AC L input
• N
• L
• AC Push input
• L1
• L
• L1
• Push DIM
• INPUT 200-240VAC
• LED OUTPUT 123 4
• DIP Switch for current selection
• Installation rack
• LED output +
• LED
• LED
• LED output –

Technical Parameters|

• Output Voltage: 10-45VDC

• Output Current: 150-700mA

• Output Power: Max. 15W

• Max Output Voltage: 48VDC

• Dimming Range: 0-100%

• PWM Frequency: 0-100Hz

• Current Accuracy: ±5%

• Input Voltage Range: 200-240VAC

• Frequency Range: 50-60Hz

• Efficiency: >85%

• Inrush Current: <1A

• Leakage Current: <0.5mA

• No Load Power: <0.5W

• Over Load Power: >18W

• Short Circuit: Auto-recovery

• Over Temperature: Auto-recovery

• Working Temperature: -20°C to +50°C

• T-case Max: 75°C

• Working Humidity: 20-90% RH non-condensing

• Storage Temp/Humidity: -40°C to +80°C, 10-95% RH

• Temperature Coefficient: ±0.03%/°C

• Vibration Resistance: 10-500Hz, 5G 12min/1cycle, period for
  72min each along X, Y, Z axes

• IP Rating: IP20

• Security Specifications: UL8750, EN61347-1, EN61347-2-13, TUV
  EN61347-1, EN61347-2-13

• Withstand Voltage: I/P-O/P: 3.75KVAC, I/P-FG: 1.5KVAC, O/P-FG:
  0.5KVAC

• Insulation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms /
  500VDC / 25°C / 70% RH

• EMC Emission: Compliance to EN55015, EN61000-3-2 Class C (≥50%
  load), EN61000-3-3

• EMC Immunity: Compliance to EN61000-4-2,3,4,5,6,8,11,
  EN61547

• Certifications: CE, EMC

Applications|

• Suitable for downlight, spotlight and decorative
  applications.

• Office / Commercial / Domestic Lighting, Hotels, Classrooms,
  Warehouse, Health care, Retail and Display.

• Use for retrofit upgrades & new luminaire designs.

Product Usage Instructions

1. Triac Dimming Input: Connect the Triac dimmer to the driver. Ensure that the dimmer supports a minimum dimming level of 1% to dim the LED driver to 1%. Compatible Triac dimmers include Lutrom, Clipsal, and Dynalite dimmers. Different Triac dimmers from different suppliers may have different minimum dimming levels.
2. AC Push-Dim Input: Use the provided AC Push-Dim interface to connect commercially available non-latching (momentary) wall switches for simple dimming control.
3. LED Current Selection: Select the desired LED current using the DIP switch on the driver. Refer to the “LED Current Selection” table in the user manual for available options.
4. Wiring Diagram: Follow the wiring diagram provided in the user manual to correctly connect the driver and LED lights. There are different wiring configurations based on whether a Triac dimmer or AC Pushswitch is used.

Model No.: TE-15A

Features

• Dimming interface: Triac/ELV, AC Push-Dim
• Apply to leading edge/trailing edge Triac dimmers and dimming system
• PWM digital dimming, no alter LED color rending index
• 1 channel constant current output, configurable current via DIP switch
• Over-heat / Over-load / Short circuit protection, recover automatically
• Full protective plastic case
• Suitable for indoor LED lighting application
• 5 Year, 50,000hr warranty

Mechanical Structures and Installations

Technical Parameters

LED Current Selection:

Applications

• Suitable for downlight, spotlight and decorative applications.
• Office / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health care, Retail and Display.
• Use for retrofit upgrades & new luminaire designs.

Wiring Diagram

1. Connect Triac dimmer(no Neutral wire)
2. Connect Triac dimmer(with Neutral wire)
3. Connect AC Push switch

Triac Dimming Input

While connected with a Triac dimmer, such as Lutrom, Clipsal, Dynalite dimmer, different Triac dimmers from different suppliers may have different minimum dimming levels which the driver can not be dimmed below. To dim to 1%, please make sure the dimmer supports 1% minimum dimming level.

AC Push-Dim input

The provided AC Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs

• Short press:
  • Turn on or off light.
• Long press (1-6s):
  • Press and hold to step-less dimming,
  • With every other long press, the light level goes to the opposite direction.
• Dimming memory:
  • Light returns to the previous dimming level when switched off and on again, even at power failure.
• Synchronization:
  • If more than one LED driver are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%.
  • This means there is no need for any additional synchrony wire in larger installations.
  • We recommend the number of LED drivers connected to a push switch does not exceed 25 pieces,
  • The maximum length of the wires from push to LED driver should be no more than 20 meters.

Dimming Curve

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>