ETERNICO MSB500 Wireless & Bluetooth Mouse User Manual
- June 6, 2024
- ETERNICO
Table of Contents
ETERNICO MSB500 Wireless & Bluetooth Mouse
THANK YOU FOR CHOOSING US!
We value your trust. We hope you will be happy with our product, and as
excited about it as we are. We try to offer products of the highest quality
that meet even the most demanding requirements. If you are satisfied, it would
make us very happy if you chose us again the next time you purchase.
We are environmentally conscious, so we use special eco-friendly packaging.
Please recycle!
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they
are absolutely necessary to protect the product. So how are we different?
Packaging you can eat… Well, almost. 🙂
We use ink made from soybeans as opposed to traditional petroleum-based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose
only water-soluble ones.
We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and put findings of the scientific community into practice. We don‘t just try to meet quotas and mandates – we aim to exceed them.
TECHNICAL PARAMETERS
| Sensor resolution | 1000/1600/2400 DPI |
|---|---|
| Sensor technology | Optical |
| Number of buttons | 6 |
| Scroll wheel | Yes |
| Wireless range | up to 20 m (wireless 2.4 GHz) and up to 10 m (Bluetooth) |
| Power supply | 1×AA |
| Dimensions | 110×68×43 mm |
| Weight | 80 g (without batteries) |
| Operating temperature | 0° to 40 °C |
OVERVIEW
- Left button
- Scroll wheel: Also serves as a middle button
- Right button
- DPI: For changing sensor resolution
- Forward and back button
- Wireless receiver
- Battery slot:**** For switching between 2.4GHz, BT1 and BT2 modes
- Connection mode button modes: For turning the mouse on and off
- ON/OFF switch
- Wireless receiver: The wireless receiver is under the battery cover.
INSTALLATION
Pairing the Mouse with Another Device
– Open the battery cover and insert a battery (remove the protective foil
from the battery).
A: Connection via 2.4GHz Nano Receiver:
-
Remove the receiver from underneath the battery cover.
-
Insert the receiver into the device that you want to pair with the mouse; the receiver will be
installed automatically. -
Switch the mouse on; the mouse is ready to use.
B: Connection via Bluetooth:
- On the bottom of the mouse, press the mode switch. The BT1 or BT2 LED indicator will be turned on.
- After the BT1 or BT2 indicator is turned on, press and hold the switch until the indicator starts blinking, signalling that the mouse is ready to pair. If the LED is not blinking, hold the mode switch for 3-5 seconds to initiate pairing mode.
- S elect the option “Add Bluetooth device” on your device and look for the pairing name of the mouse MSB500_3.0 / MSB500_5.0.
- Confirm your selection; the mouse is ready to use.
Note: If the mouse doesn’t work, check the battery, whether the mouse is turned off, and whether it is within range of the wireless receiver.
Power saving mode
When it is not being used, the mouse goes into power saving mode to decrease
electrical consumption. You can wake the mouse up by pressing any button.
SAFETY INFORMATION
- Use the product only for its intended purpose.
- Incorrect use of the product may cause a risk of fire, explosion or other hazards, and may result in the warranty being voided.
- This product is not a toy. It may contain small parts. Keep out of reach of children.
- Store the product in a clean and dust-free environment
- Do not expose the product to high or low temperatures. Keep the product dry.
- Do not disassemble the product. Improper modifications can damage the product and cause serious injuries.
- Use only a soft, clean, dry cloth to clean the surface of the product.
The use of the WEEE Symbol indicates that this product should not be treated
as household waste. By ensuring this product is disposed of correctly, you
will help protect the environment. For more detailed information about the
recycling of this product, please contact your local authority, your household
waste disposal service provider, or the shop where you purchased the item.
This product meets all of the related basic EU regulation requirements. The EU
declaration of conformity is available on www. alzashop.com/DoC.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2019 Alza.cz a.s. All Rights Reserved.
