VISUAL COMFORT ARN 3622 Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT ARN 3622 Table Lamp
Product Information
Product Name: Michelena Table Lamp
Item Number: ARN 362
Package Contents: Lamp base, shade riser, finial, shade, protective cover
Tools Required (Not Included): Scissors
Notice:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect the item and
contents carefully. If any damage or defect is found, do not install. Retain
all packaging material until installation is complete and approved.
Care Instructions:
Clean only with a soft dry cloth or feather duster. Do not use abrasive or
chemical agents.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Thread the shade riser (C) to the top of the lamp base cluster.
- Remove the finial (A) from the shade riser (C).
- Remove the shade (B) from its packaging and install it to the shade riser (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
- Install light bulbs into the sockets.
- Remove the protective cover (D) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
Please ensure that you follow all safety guidelines and consult a professional if needed during the installation process.
ASSEMBLY INSTRUCTIONS
Michelena Table Lamp
Item # ARN 3622
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED
(NOT INCLUDED):
- Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Thread shade riser (C) to the top of cluster.
-
Remove finial (A) from shade riser (C).
-
Remove shade (B) from packaging and install to shade riser (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulbs into the sockets.
-
Remove protective cover (D) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.