Honeywell Zareba Sensepoint Pro Gas Detector User Manual
- June 9, 2024
- Honeywell
Table of Contents
Honeywell Zareba Sensepoint Pro Gas Detector
Comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres
Sensepoint Pro
The Sensepoint Pro provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both in and out of doors. Users can modify detector operation using the remote control provided without ever needing to open the unit. This enables one man, non-intrusive, operation and reduces routine maintenance time and costs.
One-Stop Shop
- Flammable, toxic and oxygen versions available
- Suitable for indoor or outdoor use
- IP65 as standard
Proven Sensor Technology
- Surecell TM electrochemical sensors
- Poison resistant catalytic bead
- Fast and reliable
- Typical 2 to 5 years operational life
**Global Certifications***
- US, Canada and Europe
- Compliant with UL, CSA and ATEX standards
- Includes hazardous area AND performance approval
Convenient to Use
- Backlit LCD for dark environments
- Fully configurable via IR remote control
- 4-20mA and relay operation
- Auto-inhibit during maintenance Cost Effective
- Minimal training required
- Non-intrusive, one-man operation
- Plug-in sensor replacement
- All necessary accessories included
Friendly Installation
- Universal mounting bracket
- 3⁄4” NPT and M20 entries included as standard
- Suitable for conduit or SWA cable/ glands installations
Range of Accessories
- Flow adaptor
- Duct mounting kit
- Collecting cone
*Pending – Contact Honeywell Analytics for more information
All detectors are supplied pre-configured and include two programmable alarm
relays as well as an industry standard 4-20mA output.
The scale, range, calibration, relay operation and alarm set points of the
detector may all be adjusted via the transmitters’ backlit LCD and an
intrinsically safe remote control that is also suitable for use in potentially
explosive atmospheres. Outputs are automatically inhibited during adjustment
thereby reducing the risk of false alarm at the control panel during
maintenance.
Sensepoint Pro is supplied with all necessary accessories for easy
installation. The detector can be mounted on a wall or round support pole
using the universal bracket provided. The detector is ideal for use with
either conduit or steel wire armored cable and glands.
A 3/4”NPT entry and M20 adaptor are included as standard. A weatherproof cap
is also included for use in the harshest outdoor conditions.
Overall, the Sensepoint Pro ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using an easy to replace plug-in sensor, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors and patented SurecellTM toxic sensor technology.
Sensepoint Pro meets the more demanding user requirements but assures you of the most cost effective solution to your gas detection needs in the long run.
Installation Details
Sensepoint Pro is designed for use in potentially explosive atmospheres. As
such, installation should follow national guidelines using suitably approved
steel wire armored cable and glands (M20 or 3/4”NPT) or conduit (3/4”NPT).
Use 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to
ensure minimum operating voltage at the detector, depending upon installed
cable length.
Various accessories are available for different applications.
Dimensions
Electrical Connections
Technical Summary
General Specification
Use
3 wire, 4-20mA, fixed point gas detector with built in alarm relays for the
protection of personnel and plant from flammable, toxic and oxygen gas
hazards. Incorporating transmitter with local display and fully configurable
via remote handheld control
Detectable Gases
Gas| Measuring Range| Operating **Temperature*
Ident Name| 1 #| 2| 3| Min| Max**
F Flammable| 0-100% LEL| | | -20°C / -4°F| 50°C / 122°F
O Oxygen| 0-25% VOL| | | -15°C / 5°F| 40°C / 104°F
C Carbon Monoxide+| 0-200ppm| 0-500ppm| | -20°C / -4°F| 50°C /
122°F
H Hydrogen Sulfide+| 0-50ppm| 0-20ppm| 0-100ppm| -20°C / -4°F|
50°C / 122°F
G Hydrogen| 0-1000ppm| | | -5°C / 23°F| 40°C / 104°F
+ SurecellTM Sensor Technology
| #Standard range *Check certified temperature
Electrical
General| 3 wire connection, 12-30Vdc, 4-20mA (source), common 0Vdc
7 x screw terminals for O.5mm2 (20AWG) to 2.5mm2 (14AWG) wire Maximum
operating current: 300mA (flammable), 150mA (toxic and oxygen) Maximum peak in
rush current: 600mA
Signal| 22mA Maximum over
range
4-20mA Normal operation: 0-100% full scale
2mA or 4mA Output inhibited (2mA or 17.4mA for oxygen)
0mA Fault
Alarm Relays| 2 x 3A@240Vac alarm relays
User configurable alarm trip point, normally energized/de-energized operation
Link selectable output as NO or NC
|
Construction
Material| Main body: Powder coated aluminum (ADC12) Sensor: 316
stainless steel Weatherproof cap: Aluminum, 316 stainless steel mesh
Weight| 1450g
Certification ATEX
UL| Sensepoint Pro Sensepoint Pro Remote Control ZHC1
Ex II 2G EEx d IIC T4 Ex II 2G
EEx ib IIC T4
(Tamb = -20°C to +50°C / -4°F to +122°F) (Tamb = -20°C to +50°C / -4°F
to +122°F)
Class 1, Div 1, Groups B, C, D Class 1, Div 1,
Groups A, B, C, D
(Tamb = -20°C to +50°C / -4°F to +122°F) (Tamb = -20°C to +50°C / -4°F
to +122°F)
Applicable Standards| North America: UL1203
Europe: CE, ATEX, EMC (EN50270)
Contact Honeywell Analytics for latest information
|
Environmental
IP Rating| IP65 as standard in accordance with EN60529:1992
Operating Temperature| Dependent upon gas type and certification
Operating Humidity Range| Continuous: 20-90%RH (non condensing),
Intermittent: 10-99%RH (non condensing)
Operating Pressure| 90-110kPa
Storage Conditions| Instrument -40°C to +50°C (-40°F to +122°F)
Ordering Information
Standard Supply
Each detector is supplied complete with IS remote control, 3⁄4”NPT entry,
3⁄4”NPT to M20 adaptor, wall mounting bracket, pole mounting bracket,
weatherproof cap, necessary Allen keys and instruction manual all sealed in a
plastic bag inside a shipping carton|
|
Shipping Details
Shipping carton dimensions: L312mm (12.3”) x W223mm (8.8”) x D110mm (4.3”)
Approximate weight: 1.5Kg (3.3llbs)|
|
Optional Accessories
SPPPCC Collecting cone SPPPCAL Flow adaptor SPPPDM Duct mounting kit|
|
Calibration Equipment
Contact Honeywell Analytics Representative|
As World leaders in gas detection solutions, Honeywell Analytics’ Zareba range
of gas detection systems has been designed to provide efficient, practical and
cost-effective equipment to protect people from a variety of forms of
hazardous gas. The equipment
is also simple to install and easy to operate and maintain.
The Zareba range of fixed gas detection
Sensepoint range
Designed for industrial use, the Sensepoint range provides an easy way of
ensuring legislative requirements are met.
Find out more
www.honeywellanalytics.com
Customer business centre
Europe and the rest of the world Honeywell Analytics AG
Wilstrasse 11-U11
CH-8610 Uster
Switzerland
Tel: +41 (0)44 943 4300
Fax: +41 (0)44 943 4398
[email protected]
Customer business center
Americas
Honeywell Analytics Distribution, Inc.
400 Sawgrass Corporate Pkwy
Suite 100
Sunrise, FL 33325
USA
Tel: +1 954 514 2700
Toll free: +1 800 538 0363
Fax: +1 954 514 2784
[email protected]
www.honeywell.com
Touchpoint
Designed for industrial use, the Touchpoint range provides an easy way of
ensuring legislative requirements are met. It is particularly suited where a
number of small, discrete, stand-alone systems are required.
Metro
For commercial environments such as car parks, municipal buildings and retail
facilities, Metro offers a fully programmable, addressable gas detection
system.
Unipoint is a simple DIN rail mounted controller offering integrators a flexible and low cost solution to incorporate flammable, toxic or oxygen gas detection into their control systems. From car parks and boiler houses to analyzer shelters or crane cabs in offshore facilities.
Please Note:
While every effort has been made to ensure accuracy in this publication, no
responsibility can be accepted for errors or omissions.
Data may change, as well as legislation, and you are strongly advised to
obtain copies of the most recently issued regulations, standards, and
guidelines.
This publication is not intended to form the basis of a contract.
© 2005 Honeywell Analytics
H_Sensepoint Pro_DS0328_V1 12/05
© 2005 Honeywell Analytics
firealarmresources.com
References
- Fire Alarm Resources | Download fire alarm documents
- Honeywell - The Future Is What We Make It
- Honeywell Analytics