Tianyuan C9 Small Thermal Printers User Manual
- September 5, 2024
- Tianyuan
Table of Contents
Tianyuan C9 Small Thermal Printers
Instructions
Please read the instructions carefully before using this product The specification ,s for reference only, the specific operation shall be in kind.
brief Introduction
Welcome and thank you for choosing our products, in order to understand and
use our products more quickly, it is recommended that you read this manual
carefully before use, and keep it properly for future reference. Warnings and
precautions in the instruction manual should be complied with. If there is any
reference error, we hope that users will understand that the design content
will be changed without notice.
This product is a unique shape, exquisite design, easy to operate children’s
digital printer, designed for children’s digital products, so that children in
use to learn more imagination play, experience the fun of nature.
Please charge for the first time and unplug the charger before use
Use the Wizard
-
First use please charge first, long press the power key 3 seconds to boot.
-
Apple store or Google search : Fun print, installed APP to use.
-
After bluetooth is enabled, use the app downloaded from the mobile phone to connect to the Bluetooth printer in the TAB bar of “My Device”. After successful connection, the note can be printed.
Paper Replacement Course
-
Take out the old paper roll and put the new paper roll in the direction shown. The paper should be put straight and not crooked. (Note: The new thermosensitive paper needs to be exposed to 2 cm of paper bin length so that the machine can absorb paper automatically when the paper bin is shaped)
-
Cover the paper bin, the machine can automatically absorb paper after normal use.
-
After the above steps are correct, the machine can print normally.
Battery Warning Note
- Please use SV charger to charge according to the specification to avoid damage to the machine
- Disassembly, impact, extrusion or fire are prohibited,
- If severe bulging occurs, do not continue to use;
- Do not put in high temperature environment, battery after immersion is prohibited to use;
- Replacement with the wrong type of battery can be explosive, be sure to follow the instructions to dispose of used batteries.
Attention
- When charging, please gently insert or pull out the charging line to prevent excessive force damage to theport;
- After charging, please unplug the charging line in time,
- In order to avoid danger, do not use or charge in high temperature, high humidity, excessive smoke and dust environment, such as: bathroom, steam room, open fire, etc;
- Improper charging may lead to print head damage;
- Do not touch the print head to prevent overheating and scalding;
- Tear paper blade sharp, be careful not to touch.
The depth of the print can be controlled through the APP in the»Concentration«section as shown in the picture below. The concentration setting can be set to Shallow, Moderate or Deepen.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>