amazon basics B0BC25JK9J Semi Weighted Keyboard with Sustain Pesal User Guide

amazon basics B0BC25JK9J Semi Weighted Keyboard with Sustain Pesal

Digital Piano 88 Key Semi-Weighted Keyboard with Sustain Pedal B0BC25JK9J,B0BBL6TP12,B0BC26WN7C

Setting Up the Instrument

1. Connecting power supply
2. Connecting sustain pedal
3. Connecting headphones

Basic Operation

Switching on/off

• To switch on, press the on/off button. The PIANO button on the front control panel and the LED display light up. This instrument default mode is set to PIANO timbre.
• To switch off, press the on/off switch again. Indicator lights go off on all buttons.

Adjusting volume

• To increase the volume, turn the master volume knob clockwise.
• To reduce the volume, turn the master volume know counter-clockwise.

UP/DOWN button

• To select the upper functions on the front control panel press the UP/DOWN button. The LED display shows FU2. The indicator on the UP/DOWN button lights up.
• To select the lower function on the front control panel press the UP/DOWN button again. The LED display shows FUt The indicator on the UP/DOWN button goes off.

Descriptions on front control panel GM TIMBRE+

Descriptions on front control panel

Upper function FU2
START/STOP
SYNC
FILL-IN
INTRO/ENDING
Descriptions on front control panel

SINGLE CHORD
FINGERED CHORD
MEMORY
Ml
M2
M3
RHYTHM+

Selecting basic timbres

1. Verify that the indicator on the UP/DOWN button is off. If on, press the UP/DOWN button.
2. Press one of the corresponding button. The corresponding timbre code appears on the LED display.

Built-in memory
This function allows you to store up to 3 sets of timbre, rhythm and tempo information.

To save timbre, rhythm and tempo

1. Set a preferred rhythm, timbre, and tempo.
2. Verify that the indicator on the UP/DOWN button is on. If off, press the UP/DOWN button.
3. Press and hold the MEMORY button on the front control panel, then press M1, M2 or M3 to save the setting under selected memory.

To retrieve a memory setting

1. Verify that the indicator on the UP/DOWN button is on. If off, press the UP/DOWN button.
2. Press M1, M2 or M3 to set a desired memory. The indicator.rfJ of the selected memory M1, M2 or M3 button lights up. /

Functions

Turning on keyboard percussion

1. To turn the keyboard percussion on, press and hold the FUNCTION• button, then press the assigned key in the KEYBOARD PERCUSSION key area.
2. To turn the keyboard percussion off, press and hold the FUNCTION+ button, then press the assigned key in the KEYBOARD PERCUSSION key area again.

Selecting timbre

1. Verify that the indicator on the UP/DOWN button is off. If on, press the UP/DOWN button.
2. Press the GM TIMBRE’ button on the front control panel. The indicator on the GM TIMBRE+ button lights up.
3. Press and hold the GM TIMBRE’ button.
4. Enter 3-digit timbre code in the GM TIMBRE/RHYTHM/DEMO SONG key area or press[-] to select previous timbre code, or[+] to select next timbre code. The corresponding timbre code appears on the LED display.

Setting tempo

1. Press and hold the FUNCTION• button.
2. Select a tempo code (30-300) in the TEMPO key area or press[-] to decrease tempo, or[+] to increase tempo. The corresponding tempo code appears on the LED display. For example, press 1-4-5 in sequence to set tempo to 145.
3. To set a default tempo press and hold FUNCTION• button, then press the TAP key.

Using rhythms

1. Verify that the indicator on the UP/DOWN button is on. If off, press the UP/DOWN button.
2. Press and hold the RHYTHM• button on the front control panel.
3. Enter 3-digit rhythm code in the GM TIMBRE/RHYTHM/DEMO SONG key area or press[-] to select previous rhythm, or[+] to select next rhythm. The corresponding rhythm code appears on the LED display.

Using metronome
To start the metronome

1. Verify that the indicator on the UP/DOWN button is off. If on, press the UP/DOWN button.
2. Press the METRONOME button on the front control panel. The indicator on the METRONOME button lights up and the 1/4 metronome starts automatically.
3. To stop the metronome press the METRONOME button again. The indicator on the METRONOME button goes off.

To select metronome mark

1. Verify that the indicator on the UP/DOWN button is off. If on, press the UP/DOWN button.
2. Press and hold the FUNCTION’ button.
3. Select the desired metronome mark in the METRONOME key area. The corresponding metronome mark appears on the LED display.

To adjust metronome volume

1. Press and hold the FUNCTION• button.
2. Select volume level from 1 to 5 (1 is lowest and 5 is highest) in the ACCOM & METRONOME VOLUME key area. The corresponding metronome volume level appears on the LED display.

Activating chord timbre

1. Press and hold the FUNCTION’ button.
2. Press the CHORD TIMBRE key. 0 n appears on the LED display.
3. To restore the default chord tone, press and hold the FUNCTION’ button, then press the CHORD TIMBRE key again. OFF appears on the LED display.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>