VISUAL COMFORT S 3407 Cranston Buffet Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT S 3407 Cranston Buffet Lamp
Product Information
- Product: Cranston Buffet Lamp
- Item Number: S3407
- Usage: This is a light fixture that can be used to provide additional lighting in a room, particularly on a buffet table or sideboard.
- Installation: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Please inspect the item and contents carefully before installation. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
Usage Instructions
- Carefully remove all parts from the box.
- Attach the finial (A) to the top of shade (B) and secure with screw (C) and washer (F).
- Place shade (B) onto the socket and secure with thread ring (D).
- Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is working properly.
- Installation is complete.
Note: Please ensure that the lamp is installed by a person familiar with its construction and operation, as well as the hazards involved. Also, make sure to comply with all applicable, local installation codes.
NOTICE
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
Installation Instructions
- Carefully remove all parts from the box.
- Attach the finial (A) to the top of shade (B) and secure with screw (C) and washer (F).
- Place shade (B) to the socket and secure with thread ring (D).
- Insert bulb (not included) into the socket.
- Remove protective plug cover (E) from the plug.
- Plug into a proper electrical outlet and test the fixture.
- Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>