VISUAL COMFORT TOB 2730 Jonathan Sconce Wall Light Instruction Manual

VISUAL COMFORT TOB 2730 Jonathan Sconce Wall Light

Product Information

• Product Name: Jonathan Sconce
• Item Number: TOB 2730
• Usage: Light fixture

Product Usage Instructions

1. Carefully remove all parts from the box.
2. Remove the mounting plate (B) from fixture body (E) by loosening side screws (C).
3. Affix mounting plate (B) onto the outlet box and secure with mounting screws (D).
4. Connect the hot wire (BLACK) from the fixture to the hot wire from the electrical supply using wire connectors, following local installation codes.
5. Connect the neutral wire (WHITE) from the fixture to the neutral wire from the electrical supply using wire connectors, following local installation codes.
6. Attach the grounding wire (GREEN or BARE COPPER) from the fixture to the grounding wire from the electrical supply using wire connectors, following local installation codes.
7. Secure the fixture body (E) onto the mounting plate (B) by tightening the side screws (C).
8. Install the appropriate light bulbs or lamps into the fixture, following the manufacturer’s recommendations.
9. Turn on the electrical supply and test the functionality of the light fixture.

Care Instructions

Clean the Jonathan Sconce only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Note: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with its construction and operation, as well as the hazards involved. Inspect the item and its contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

ASSEMBLY INSTRUCTIONS

Jonathan Sconce
Item # TOB 2730

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

1. Carefully remove all parts from the box.

2. Remove the mounting plate (B) from fixture body (E) by loosening side screws (C).

3. Affix mounting plate (B) onto the outlet box and secure with mounting screws (D).

4. Connect the hot wire (BLACK) from the fixture to the hot wire from the outlet box (usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape.

5. Connect the neutral wire (WHITE) from the fixture to the wire from the outlet box (usually WHITE).
   DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.

6. Connect ground wire from the fixture (bare copper) to ground wire from the outlet box (usually green or copper in color).
   IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.

7. Attach the fixture body (E) onto mounting plate (B) and secure with side screws (C).

8. Attached the shade (G) to the socket cup (F) and secure with socket ring (H).

9. Insert bulb (not included) into the socket.

10. Installation is complete, turn on power at fuse or circuit breaker.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>