V-TAC VT-5115 LED Dimmer with Touch Remote Controller Instruction Manual
- June 4, 2024
- V TAC
Table of Contents
V-TAC VT-5115 LED Dimmer with Touch Remote Controller
TECHNICAL DATA
| Model | VT-5115 |
|---|---|
| Output | 3 Channels |
| Output Current | <6A (Each Channel) |
| Output Power | 12V:<216W, 24V:<432W |
| Supply Voltage | DC: 12V~24V |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
PRODUCT DESCRIPTION
This RF LED Dimmer with Touch Remote is one of a newly design controllers providing three channels single color output in parallel connection.
CONNECTION DIAGRAM
- DC+: For power input +（power supply voltage DC12v-24v）
- DC- : For power input –
- V+: For Load Common anode
- V-: Output cathode, three-channel in parallel
- Power: Power indication. When the power is on it will turn Red.
- Receiver: Green indicating light, normally it will be in the state of OFF, it will be twinkle when received Signal From the remote. When the controller output meets short circuit, the green indicating light will be twinkle in a Fixed frequency to indicate the user.
REMOTE FUNCTION INSTRUCTION
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE
CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B