madimac ELITE VS Inverter Pool Pump User Guide

madimac ELITE VS Inverter Pool Pump

Quick Start Guide

• Real-time active energy monitor.
• Optimal and ongoing energy efficiency.

FULL INVERTER TECHNOLOGY
Set the speed you need for your pool and save energy with fully variable speed from 30% to 100% control.

VOLUTE HYDRAULIC SYSTEM
Noise is reduced by the volute hydraulic structure making it turbulence-free, and produces lesser noise compare to the traditional diffuser type.

DC BRUSHLESS MOTOR
DC brushless motor ensures the pump has much less noise, has higher efficiency, and has more durability.

EXTERNAL CONTROL
RS485 Modbus, Digital input, Analog input, Relay output.

SOFT START
Full protection on the electrical system.

QUICK CONNECT
Perfect pairing with Madimack Pool Heater.

Intelligent Full Touch Controller

Startup

Fill the basket with water before starting up the pump. When the power is switched on, the screen will illuminate for 5 seconds.

Up and running

On the first start-up, the system initiates self-priming.

Self-priming:
When switched on for the first time after installation, the pump will start self-priming automatically and followed by self-learning.

The system performs the self-priming in Boost mode, it will count down from the 1500s and stop automatically when the system detects the pump is full of water.

Self-learning Al mode:
After the self-priming is completed, the system will perform a self-learning program to define the optimum performance rate. This is done by detecting the system’s designed pressure including pipe length, size, and filter condition. This will take 180 seconds and will define the range of available flow.

Auto and Manual Inverter Mode

• Auto Inverter Mode:
  After setting the water flow, the pump will automatically detect the system pressure and adjust the running capacity. Litres per minute will be constant wont change.

• Manual Inverter Mode:
  The running capacity can be set manually according to di erent application needs. To Reset, just power it OFF, then ON again.

• Timer:
  The timer mode can be set when different speeds throughout the day are required.
  For example, if a suction cleaner is used and requires a higher flow rate.

• Backwash:
  Start the Backwash procedure by pressing the backwash button ( ). Once pressed, the timer will start to countdown. Set the timer to your required backwash time. Once completed, Power Off Reset the filter valve and Switchback On. Refer to the existing filter guide for further details.

Operation

UP

Down

|

To change the value of capacity/ time/ flow

| Timer setting

ON/ Off

Installation

Pump Location
The pump should be installed in an area with at least 150mm distance around the unit away from any obstacles and away from any corrosive products.

Piping
Suction and return connections on the pool pumps are 50mm pressure pipe dimensions.

Valves and Fittings
It is recommended to install isolation valves on the suction and return lines for easier maintenance of the pool pump. Any valves or fittings should not be withing 350mm ot the pump, and check valves should be fitted with long pipework.

Adaptive Flow – Perfect Pairing with Madimack Pool Heat Pump

The Perfect Pairing uses the intelligent communication functions of the pool heat pump to activate the speed required for the pool pump ensuring the most efficient solution for your pool and equipment.

1. Switch the pump off with so only the power symbol is illuminated.
2. Press and hold and arrows for 4 seconds until ” is displayed at the top of the display.
3. Use the or arrow whilst on to adjust the bottom number (L/min) to the optimum flow.

Pool Heater kW size|

Flow rate L/min

---|---
9-16| 100
17-20| 133
21-24| 150
25-28| 183
29-32| 200
33-36| 250
37-40| 283

Refer to the Full Installation Manual for more details.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>