ATEN US3312 2 Port 4K DisplayPort USB C Cable KVM Switch with Remote Port Selector User Guide

US3312
2-Port 4K DisplayPort USB-C Cable KVM
Switch with Remote Port Selector
Quick Start Guide

Hardware Overview

Front View

1. port LEDs
2. console ports
3. remote port selector
4. USB-C connector 1
5. USB-C connector 2

Installation

1. Connect the USB mouse, USB keyboard, and DisplayPort monitor into their respective ports on the US3312.
   Note: The USB Type-A ports can be used for USB peripheral sharing.
   Connect the USB peripherals and the USB keyboard or USB mouse into a USB hub, and then connect the USB hub into one of the USB Type-A ports.

2. Connect the USB-C connectors of the attached KVM cables into their respective ports on the USB-C devices that you are installing.

To prevent damage to your installation from power surges or static electricity, it is important that all connected devices are properly grounded.

Operation

Press the remote port selector to switch KVM control between the two computers.
The port LED for the selected port lights green.
Switching Between High Speed and Normal Speed Modes
To switch between high speed and normal speed modes, press and hold the remote port selector for 3 seconds.

• High Speed Mode: The port 1 and port 2 LEDs flash once to indicate the device is set to high speed mode. This is the default setting.
• Normal Speed Mode: The port 1 and port 2 LEDs flash twice to indicate the device is set to normal speed mode.

Package Contents

1 2-Port 4K DisplayPort USB-C Cable KVM Switch with Remote Port Selector
1 user instructions
Support and Documentation Notice
All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information

|
https://www.aten.com/global/en/products/modelno/us3312/| http://www.aten.com/ext_libraries/manuals.php?n=us3312

US3312 2-Port 4K DisplayPort USB-C Cable KVM Switch with Remote Port Selector
www.aten.com
© Copyright 2023 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
Part No. PAPE-1223-X20G
Released: 06/2023

References

• eService System
• USA Location information - USA.com
• ATEN - Simply Better Connections | ATEN U.S.A.
• Downloads | ATEN Corporate Headquarters
• ATEN - Simply Better Connections | ATEN Corporate Headquarters
• ATEN Product Warranty | ATEN Corporate Headquarters
• A+ Warranty | ATEN Corporate Headquarters
• LCD KVM Switches / Consoles | ATEN Corporate Headquarters

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>