ricoo LS01 Laptop Stand Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo LS01 Laptop Stand
Product Information
The product is a mounting assembly kit manufactured by E.N.Z. Engineering GmbH. It is designed to be used for a specific purpose and requires assembly. The kit includes the following components:
- A x1
- B x1
- C x1
- D x1
- E x2
- F x2
- G x4
- H x8
Contact information for support:
- Telephone: +49 (0) 7644-565310
- Fax: +49 (0) 7644-5653199
- Email: support@ricoo.de
- Website: www.ricoo.eu
- Address: E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany)
Product Usage Instructions
Before starting the assembly process, please read the entire instruction manual.
To assemble the kit, follow these steps:
- Identify the components A, B, C, D, E, F, G, and H.
- Place component A in the designated position.
- Attach components E and F to component A.
- Place component B in the designated position.
- Attach components G and H to component B.
- Place component C in the designated position.
- Attach component H to component C.
- Place component D in the designated position.
- Attach components G and H to component D.
- The assembly is now complete.
Once assembled, the product is ready for use.
Assembly Instructions
WHAT’S IN THE BOX
Scope of delivery
Dear customer,
we are pleased that you have decided for a product of the brand “RICOO”.
Sometimes, despite our efforts to provide you with a high-quality product, it
may happen that an accessory is missing or a part is damaged during transport.
Please do not return the item in such a case, simply request replacement for
the missing or damaged part at our customer hotline. Contact details from our
customer hotline are listed below. When contacting us, please mention the
article data (listed on top), article color as well as the required spare part
numbers (including the required quantity of items), as indicated in the “Scope
of delivery” section of this manual. Please keep ready your order number/order
ID for our customer hotline. We will process your request immediately!
NOTE: Read the entire instruction manual before you start installation and assembly
- Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
- This product may only be assembled/installed by the technical staff.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.
HOW TO FIX SCREWS
Done!
- Telephone: +49 (0) 7644-565310
- Fax: +49 (0) 7644-5653199
- Email: support@ricoo.de
- Website: www.ricoo.eu
- Address: E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>