ricoo TS3811 Height-Adjustable Monitor Desk Mount Instruction Manual
- October 30, 2023
- ricoo
Table of Contents
ricoo TS3811 Height-Adjustable Monitor Desk Mount
Product Information
- Product Name: Screen Mount
- Model Number: TS3811
- Version: v.21.10
- Maximum Load Weight: 7kg (15.4lbs)
- VESA Hole Distance: A – 75mm, B – 75mm, A – 100mm, B – 100mm
- Manufacturer: E.N.Z. Engineering GmbH
- Manufacturer Address: Salzmatten 6, 79341 Kenzingen (Germany)
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display to ensure it falls within the minimum and maximum distance ranges given above.
- Ensure that the load weight of your display does not exceed 7kg (15.4lbs) to prevent property damage or serious injury.
- Refer to the scope of delivery list to ensure all necessary parts are included.
- Follow the assembly instructions provided in the manual to properly install the screen mount.
- Adjust the distance between the mount and the wall according to your preference. The distance can range from 10-25mm depending on the parts used.
- Once installed, ensure that your display is securely attached and adjust as necessary.
- If you have any issues with installation or usage of the product, contact the manufacturer’s support team via email or their website.
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Dimensions
Please check BEFORE installation distance between VESA mounting holes on your display!This screen mount supports VESA hole distance in the minimum and maximum distance ranges given above. VESA – Hole distance = Distances between the mounting holes on the screen back.
Scope of delivery
The numbering on the plastic bag may differ / missing completely!
Assmebly
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND
ASSEMBLY
Please note: Images in these assembly instructions are only technical
presentation of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the
instructions and warnings contained in this installation sheet. If you have
any questions regarding any of the instructions or warnings, please contact
your local distributor. This product was designed to be installed and used
ONLY as specified in this manual. Improper installation of this product may
cause damage or serious injury. This product may only be assembled / installed
by the technical staff. Make sure that the supporting surface will safely
support the combined weight of the equipment and all attached hardware and
components. Always use an assistant or mechanical lifting equipment to safely
lift and position the equipment. Make sure that before and after the
installation of the product neither you nor somebody else can be injured and
other objects can be damaged. In case of doubt request for help from an
expert. This product is intended for indoor use only. Using this product
outdoors could lead to product failure and personal injury. Tighten screws
firmly, but do not over tighten. Over tightening can cause damage the items,
this greatly reduces their holding power.
By reason of large television construction types on the market, we can’t
adjust our screen installation materials for each screen type. Therefore it is
possible that the screws which are
numerously delivered don’t fit with your TV/Monitor. We ask for your
understanding that we can’t cover up all possibilities of many screen types.
When mounting on the wooden beams wall, make sure that the fastening screws
are anchored in the center of the beams. It is highly recommended to use a
beamfinder. If your walls have a special demand of materials, we advise you to
ask in an expert shop for a suitable acquirement of the installation
materials.
