ricoo S3244 TV Wall Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo S3244 TV Wall Mount
Product Information
This product is a screen mount used for mounting displays on walls. It supports VESA hole distances and has a maximum load weight of 30kg (66lbs). The package includes various screws, spacers, and plastic anchors for installation.
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display.
- Ensure not to exceed the listed load weight to avoid property damage or serious injury.
- If you have a solid concrete wall, use the supplied plastic anchors for installation.
- Follow the provided assembly instructions to attach the screen mount to the wall.
- If the screws provided are too long, use the plastic spacers included in the package.
- Make sure to use a bubble level during installation for accurate positioning.
- Once the installation is complete, your display is securely mounted on the wall.
Please note that these are general instructions. Refer to the specific steps and diagrams in the user manual for your product model for detailed guidance.
If you have any further questions or need assistance, please contact support at support@ricoo.de or visit www.ricoo.eu.
BEFORE installation
Please check BEFORE installation distance between VESA mounting holes on your
display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen
back.
Scope of delivery
INSTRUCTION
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
- Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet.
- If you have any questions regarding any of the instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury. This product may only be assembled/installed by the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
- Each wall is built up of different materials which can result a special requirement. Therefore we are concentrating on the delivery of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
- When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beamfinder. If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
ASSEMBLY
Tel: +49 (0) 7644-565310
Fax: +49 (0) 7644-5653199
E-Mail: support@ricoo.de
www.ricoo.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>