ricoo CZ0900 Projector Stand Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo CZ0900 Projector Stand
Product Information
The product is manufactured by E.N.Z. Engineering GmbH and their contact details are as follows:
- Company : E.N.Z. Engineering GmbH
- Address: Salzmatten 6, 79341 Kenzingen (Germany)
- Email: support@ricoo.de
- Website: www.ricoo.eu
The product is a screen mount that supports VESA hole distances. It has a maximum load weight of 15kg (33lbs). Please ensure that the load weight is not exceeded to avoid property damage or serious injury.
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display.
- Refer to the following VESA hole distance options:
- A: 75 mm x 75 mm
- B: 75 mm x 75 mm or 100 mm x 100 mm
- Mount the screen according to the VESA hole distances mentioned above.
Additional Information
The package includes the following items:
- A: 1 piece
- B: 1 piece
- C: 4 pieces
- D: 4 pieces
- E: 4 pieces
- F: 4 pieces
- G: 4 pieces
- M4x12: 4 pieces
- M5x12: 4 pieces
- CZ0900: 1 piece
Please ensure that all components are present before starting the installation process.
Assembly Instructions
WEIGHT AND CAPACITY
Warning : Do not exceed the listed load weight. Property damage or serious injury may occur!
REQUIRED TOOLS
The numbering on the plastic bag may differ/missing completely!
S5564 E-Mail: support@ricoo.de www.ricoo.eu
DIMENSIONS
Please check:
BEFORE installation distance between VESA mounting holes on vour display! This
screen mount sensors VESA hole distance in the minimum and maximum distance
ranges given shove VESA – Hole distance = Distances between the mounting holes
on the screen back
INSTALLATION
HOW TO FIX
HOW TO USE
NOTE:
READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally. Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury. This product may only be assembled/installed by the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their no dine power.
By reason of the large television construction types on the market, we cant adjust our screen installation materials for each screen type.
Therefore it is possible By reason or large television construction types on the market, we can? ad ust our screen installation materials for each screen type. Therefore it Is possible that the screws which are numerously delivered don t hit your 1W/Monitor. We ask for your understanding that we can cover up all possibilities of many Screen tubes