ricoo TS0811 Dual Monitor Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo TS0811 Dual Monitor Mount
Product Information
Product Model: v.210.016
Maximum Load Capacity: 2 x 8kg (17.6lbs)
VESA Hole Distance: Supports distances of 75x75mm and 100x100mm
Manufacturer: E.N.Z. Engineering GmbH
Manufacturer Address: Salzmatten 6, 79341 Kenzingen (Germany)
Contact Information: E-Mail: support@ricoo.de, Website:
www.ricoo.eu
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display to ensure compatibility.
- Ensure that the load weight does not exceed the listed maximum load capacity of 8kg (17.6 lbs) per mount. Exceeding this weight limit may result in property damage or serious injury.
- Using the provided components, follow the assembly instructions in the user manual to mount the product on the desired surface.
- For optimal installation, it is recommended to use a professional bubble level to ensure proper alignment.
- Once assembly is complete, verify that all components are securely fastened and the product is stable.
- The product is now ready for use.
Assembly Instructions
WEIGHT AND CAPACITY
Warning : Do not exceed the listed load weight. Property damage or serious injury may occur!
DIMENSIONS
Please check:
BEFORE installation distance between VESA mounting holes on your display! This
screen mount supports VESA hole distance in the minimum and maximum distance
ranges given above. VESA – Hole distance = Distances between the mounting
holes on the screen back.
TS0811
E-Mail: support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH Salzmatten 6 79341 Kenzingen (Germany)
WHATS IN THE BOX
We recommend using a professional level. The numbering on the plastic bag may differ/missing completely!
NOTE : Read the entire instruction manual before you start installation and assembly
- Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
- This product may only be assembled / installed by the technical staff.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this greatly reduces their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- By reason of large television/monitor construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert.
- Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.
INSTALLATION
SAFETY GUIDENCE
HOW TO FIX
Done
E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>