ricoo SQ75 TV Wall Mounts Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo SQ75 TV Wall Mounts
Product Information
Model| Supported TV/Monitor Types| Load Capacity| Language Options| Contact
Information
---|---|---|---|---
Q7/Q7FN/Q8/Q85R Q90R/Q900R Q950R/Q9/Q9FN| All types of TVs and monitors| 50kg
/ 110lbs| DE, EN, FR, ES, IT| E-Mail: support@ricoo.de
Website: www.ricoo.eu
Address: E.N.Z. Engineering GmbH Salzmatten 6, 79341 Kenzingen
(Germany)
Product Usage Instructions
Note:
Read the entire instruction manual before you start installation and assembly.
Warning:
Do not exceed the listed load weight. Property damage or serious injury may occur!
Scope of Delivery:
- A x1
- B x1
- C x1
- D x2
- E x1
- F x4
- G x4
- H x4
- I x2
- J x2
- K x2
- L x2
- M x2
- N x5
- O x5
- P x4
- Q x4
- 8×36
- W-A x6
- W-B x6
- W-C x6
Usage Instructions:
Preparing for Installation
Make sure to read the entire instruction manual before starting the
installation process.
Ensure that you have all the necessary components listed in the “Scope of
Delivery” section.
Wall Type and Installation Materials:
- Our installation materials are designed for mass concrete walls. Only use the included installation accessories for mass concrete walls.
- Note that different walls may require special requirements. Therefore, we cannot guarantee compatibility with all types of walls.
Mounting the TV/Monitor:
Follow the numbered steps and corresponding diagrams provided in the user manual to correctly mount your TV/Monitor.
Safety Precautions:
- Do not exceed the maximum load capacity specified for the product.
- Use caution and follow all safety guidelines during installation to prevent property damage or personal injury.
Contact Information:
For any further assistance or inquiries, you can contact our support team via email or visit our website.
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Scope of delivery
We recommend using a professional level.
NOTE: Read the entire instruction manual before you start installation and assembly
- Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
- This product may only be assembled/installed by the technical staff.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beamfinder.
- Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
- Each wall is built up of different materials which can result a special requirement. Therefore we are concentrating on the delivery of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
- If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert.
- Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.
ASSEMBLY INSTRUCTION
E-Mail: support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH Salzmatten 6 79341 Kenzingen (Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>